Does the PSA GEN2 KS47 Classic work with the PSA GEN2 KS-47 8.5" Pistol-Length?

PSA Gen2 KS47 Complete Classic Lower Receiver

Lower Receiver

PSA GEN2 KS47 Classic

PSA Gen2 KS-47 8.5" Pistol-Length 7.62x39 1/10 Nitride 7" Lightweight Hex M-Lok Upper With BCG & CH

Upper Receiver

PSA GEN2 KS-47 8.5" Pistol-Length 7.62x39 1/10 Nitride 7"

Palmetto State Armory lower and Palmetto State Armory upper compatibility

Yes, they fit

The PSA GEN2 KS47 Classic works with the PSA GEN2 KS-47 8.5" Pistol-Length 7.62x39 1/10. Our compatibility rules found no conflict between them.

This exact setup is in a real GunPartPicker build.

Counted from real GunPartPicker builds: parts lists people put together while planning to buy.

Checked by the same rules the AR builder runs on every part you add: caliber, frame size, receiver pattern, thread pitch and gas length.

Fit is judged from the specs retailers list, which can be missing or wrong. Confirm with the manufacturer before you buy, and have a qualified gunsmith check any build before you fire it.

How often builders pair the Palmetto State Armory lower and Palmetto State Armory upper

Backed by tens of thousands of qualified builds that have both a lower and an upper.

Upper Receivers builders put on the PSA GEN2 KS47 Classic

Share of builds with the PSA GEN2 KS47 Classic and any upper

  • PSA GEN2 KS47 Classic

    Of lower picks
    0.3%
    Median paid
    n/a

  • PSA GEN2 KS-47 8.5" Pistol-Length

    Of upper picks
    0%
    Median paid
    n/a
How we count ⌄

These shares come from GunPartPicker's build data: real parts lists people put together while planning a purchase, not sales or surveys. A build counts a part only when it is the final pick for its slot, so parts that were swapped out never count. Fit never comes from these numbers; it comes from our compatibility rules alone.

Frequently built with the Palmetto State Armory lower and Palmetto State Armory upper

The part builders pick most often in each slot alongside these two, checked against both. Parts that conflict are left out.

Trigger

Charging Handle

Stock & Brace

Bolt Carrier Group

Optic

Light

Rifle Scope

PSA GEN2 KS47 Classic vs PSA GEN2 KS-47 8.5": specs and prices

PSA GEN2 KS47 ClassicPSA GEN2 KS-47 8.5"
Best pricen/an/a
Storesn/an/a
AssemblyCompleteComplete
PlatformAR-15AR-15
Caliber7.62x39mm7.62x39mm
Trigger Pin.154n/a
FinishHardcoat Anodizedn/a
ColorBlackn/a
Gas System Lengthn/aPistol
Lengthn/a8.5

Upper Receivers frequently paired with the PSA GEN2 KS47 Classic

Most picked next to it in real builds. Only parts our rules say fit the PSA GEN2 KS47 Classic are listed.

Lower Receivers most paired with Palmetto State Armory uppers

The PSA GEN2 KS-47 8.5" Pistol-Length is not in enough builds yet, so these are the most picked next to any Palmetto State Armory upper. Only parts our rules say fit the PSA GEN2 KS-47 8.5" Pistol-Length are listed.