Gun Tools/Compatibility/Updated September 15, 2026

Forced Reset Trigger and Binary Trigger Picker

Choose your platform and see every forced reset trigger, binary trigger and Super Safety the catalog carries for it, what the host needs to run one, and where each is in stock.

Quick answer

  • 9 forced reset, binary and Super Safety triggers for the AR-15 are in the GunPartPicker catalog, 6 in stock, plus 18 lowers and rifles with one installed.
  • Forced reset triggers are legal federally after the 2025 Department of Justice settlement; fifteen states and DC restrict them, and twelve states ban binary triggers.

Source: GunPartPicker catalog and build data, prices checked September 15, 2026

Which forced reset or binary trigger fits my gun?

Pick the gun. Every forced reset trigger, binary trigger and Super Safety the catalog carries for it comes back, with what the host needs to run one.

The AR-15 is the platform every fast trigger maker builds for first. Fitment problems here are almost always the carrier or the buffer, not the trigger.

Forced reset, binary and Super Safety are different mechanisms with different legal pictures.

Triggers for this platform

9

6 in stock

Forced reset

0

reset by the carrier

Binary

9

pull and release

Complete lowers and rifles

18

fast trigger installed

What the AR-15 needs to run a forced reset trigger

The AR-15 is the platform every fast trigger maker builds for first. Fitment problems here are almost always the carrier or the buffer, not the trigger.

  • Full auto profile bolt carrier (M16 cut) for a forced reset trigger; most binary triggers run on a semi carrier
  • Mil-spec lower with standard 0.154" pin holes
  • H2 or H3 buffer and a fresh spring so the carrier does not outrun the reset

Binary triggers for the AR-15

Ranked by what builders add most, in stock first. One listing per model.

Lowers and rifles with a fast trigger installed

Factory installed, tuned and warrantied as a unit. The shortcut past the carrier and buffer questions.

Ranked by what builders add most, in stock first. One listing per model.

Forced reset and binary triggers by platform

What the catalog carries today for each host. Counts include out of stock listings so you can see what exists, not just what shipped this week.

How forced reset trigger fitment works

A forced reset trigger does one thing a normal trigger does not: it uses the bolt carrier's forward travel to push the trigger back to reset. That is why it needs a carrier with the full auto profile on the underside. A semi auto carrier has that surface milled away, so there is nothing to push with, and the gun fires once and goes dead.

Timing is the second half. The trigger has to finish resetting before the carrier comes back and the hammer follows. A gun that is overgassed, or running a light buffer, cycles faster than the reset can keep up with, and you get hammer follow, light strikes, or a trigger that feels locked. The fix is almost never the trigger. It is a heavier buffer, a fresh spring, or less gas.

Binary triggers are simpler. They fire on the pull and again on the release, no carrier interaction, so they run on any carrier. They still shoot fast enough that the same buffer advice applies.

Frequently Asked Questions

Are forced reset triggers legal?

Federally, yes, since the 2025 Department of Justice settlement ended the ATF's position that they are machine guns. State law is separate: fifteen states and DC restrict them. The state guides linked below track each one.

What is the difference between a forced reset trigger, a binary trigger and a Super Safety?

A forced reset trigger uses the bolt carrier to push the trigger forward after each shot, so the trigger is reset for you. A binary trigger fires once on the pull and once on the release. A Super Safety is a drop in selector that forces the reset on a standard trigger. Each has its own legal picture, covered in the comparison guide.

What does an AR-15 need to run a forced reset trigger?

A full auto profile bolt carrier (the M16 cut on the underside), a mil-spec lower with standard pin holes, a mil-spec or heavier hammer spring, and a heavier buffer, usually H2 or H3, so the carrier does not outrun the reset. The host requirements guide walks through all of it.

Why does my forced reset trigger fire one or two rounds and go dead?

Nine times out of ten it is a semi auto carrier. Without the full auto profile there is nothing to push the trigger forward. If the carrier is right, the gun is undergassed or the buffer is too light for the trigger to keep up.

Is there a forced reset trigger for a Glock?

Yes, from small makers, and most are built for Gen 3 frames. Franklin Armory's binary kits cover Gen 3 G17, G19 and G22. Stock changes often; the picker shows what is in stock today.

Do binary triggers need a full auto carrier?

No. Binary triggers work on standard semi auto carriers. They still benefit from a heavier buffer on a fast shooting gun.

Cite this tool: GunPartPicker, “Forced Reset Trigger and Binary Trigger Picker”, https://gunpartpicker.net/tools/frt-picker. Data from the GunPartPicker catalog and real community builds, prices checked September 15, 2026. Free to cite with attribution.

Related Guides

More Gun Tools