Does the PSA 11.5" 5.56 NATO 1/7 Nitride 10.5" work with the Palmetto State Armory Toolcraft?

PSA 11.5" 5.56 NATO 1/7 Nitride 10.5" Lightweight Hex M-Lok Upper - Without BCG & CH

Upper Receiver

PSA 11.5" 5.56 NATO 1/7 Nitride 10.5" Lightweight Hex M-LOK

Toolcraft Non-Logoed Premium 5.56 Nickel Boron BCG with Carpenter 158 Bolt

Bolt Carrier Group

Palmetto State Armory Toolcraft Non-Logoed Premium 5.56

Palmetto State Armory upper and Palmetto State Armory bolt carrier group compatibility

Yes, they fit

The PSA 11.5" 5.56 NATO 1/7 Nitride 10.5" works with the Palmetto State Armory Toolcraft Non-Logoed. Our compatibility rules found no conflict between them.

This exact setup is in a real GunPartPicker build.

Counted from real GunPartPicker builds: parts lists people put together while planning to buy.

Checked by the same rules the AR builder runs on every part you add: caliber, frame size, receiver pattern, thread pitch and gas length.

Fit is judged from the specs retailers list, which can be missing or wrong. Confirm with the manufacturer before you buy, and have a qualified gunsmith check any build before you fire it.

How often builders pair the Palmetto State Armory upper and Palmetto State Armory bolt carrier group

Backed by thousands of qualified builds that have both an upper and a bolt carrier group.

Bolt Carrier Groups builders put on the PSA 11.5" 5.56 NATO 1/7 Nitride 10.5"

Share of builds with the PSA 11.5" 5.56 NATO 1/7 Nitride 10.5" and any bolt carrier group

Upper Receivers builders put under the Palmetto State Armory Toolcraft

Share of builds with the Palmetto State Armory Toolcraft and any upper

  • PSA 11.5" 5.56 NATO 1/7 Nitride 10.5"

    Of upper picks
    0.1%
    Median paid
    n/a

  • Palmetto State Armory Toolcraft

    Of bolt carrier group picks
    0.2%
    Median paid
    n/a
How we count ⌄

These shares come from GunPartPicker's build data: real parts lists people put together while planning a purchase, not sales or surveys. A build counts a part only when it is the final pick for its slot, so parts that were swapped out never count. Fit never comes from these numbers; it comes from our compatibility rules alone.

Frequently built with the Palmetto State Armory upper and Palmetto State Armory bolt carrier group

The part builders pick most often in each slot alongside these two, checked against both. Parts that conflict are left out.

Trigger

Stock & Brace

Gas Block

Handguard

Lower Receiver

Suppressor

Barrel

Muzzle Device

Rifle Scope

Charging Handle

Pistol Grip

PSA 11.5" 5.56 NATO 1/7 vs Palmetto State Armory: specs and prices

PSA 11.5" 5.56 NATO 1/7Palmetto State Armory
Best pricen/an/a
Storesn/an/a
AssemblyCompleten/a
PlatformAR-15n/a
Gas System LengthCarbinen/a
Caliber5.56 NATOn/a
Length11.5n/a
Cartridgen/a5.56 NATO
Finishn/aNickel Boron

Bolt Carrier Groups frequently paired with the PSA 11.5" 5.56 NATO 1/7 Nitride 10.5"

Most picked next to it in real builds. Only parts our rules say fit the PSA 11.5" 5.56 NATO 1/7 Nitride 10.5" are listed.

Upper Receivers frequently paired with the Palmetto State Armory Toolcraft

Most picked next to it in real builds. Only parts our rules say fit the Palmetto State Armory Toolcraft are listed.