Does the Cross Machine Tool Upur-3A Billet Side work with the Triarc Systems Track 2.0 5.56 Mid-Length?

Cross Machine Tool Upur-3a Billet Ar-15 Side Charging Upper Receiver - Slick Side - .458 Socom Compatible

Upper Receiver

Cross Machine Tool Upur-3A Billet Side Charging

Triarc Systems Track 2.0 5.56 Mid-Length Ar-15 Barrel - 14.5"

Barrel

Triarc Systems Track 2.0 5.56 Mid-Length

Cross Machine Tool upper and Triarc Systems barrel compatibility

Yes, they fit

The Cross Machine Tool Upur-3A Billet Side Charging works with the Triarc Systems Track 2.0 5.56 Mid-Length. Our compatibility rules found no conflict between them.

This exact setup is in a real GunPartPicker build.

Counted from real GunPartPicker builds: parts lists people put together while planning to buy.

Checked by the same rules the AR builder runs on every part you add: caliber, frame size, receiver pattern, thread pitch and gas length.

Fit is judged from the specs retailers list, which can be missing or wrong. Confirm with the manufacturer before you buy, and have a qualified gunsmith check any build before you fire it.

How often builders pair the Cross Machine Tool upper and Triarc Systems barrel

Backed by thousands of qualified builds that have both an upper and a barrel.

Barrels builders put on the Cross Machine Tool Upur-3A Billet Side

Share of builds with the Cross Machine Tool Upur-3A Billet Side and any barrel

Upper Receivers builders put under the Triarc Systems Track 2.0 5.56 Mid-Length

Share of builds with the Triarc Systems Track 2.0 5.56 Mid-Length and any upper

  • Cross Machine Tool Upur-3A Billet Side

    Of upper picks
    0%
    Median paid
    n/a

  • Triarc Systems Track 2.0 5.56 Mid-Length

    Of barrel picks
    0.5%
    Median paid
    n/a
How we count ⌄

These shares come from GunPartPicker's build data: real parts lists people put together while planning a purchase, not sales or surveys. A build counts a part only when it is the final pick for its slot, so parts that were swapped out never count. Fit never comes from these numbers; it comes from our compatibility rules alone.

Frequently built with the Cross Machine Tool upper and Triarc Systems barrel

The part builders pick most often in each slot alongside these two, checked against both. Parts that conflict are left out.

Charging Handle

Handguard

Gas Block

Lower Receiver

Bolt Carrier Group

Trigger

Pistol Grip

Buffer

Buffer Tube Assembly

Cross Machine Tool Upur-3A vs Triarc Systems Track 2.0 5.56: specs and prices

Cross Machine Tool Upur-3ATriarc Systems Track 2.0
Best pricen/an/a
Storesn/an/a
AssemblyCompleten/a
PlatformAR-15n/a
Caliber.458 SOCOM5.56 NATO
Receiver TypeSlick Siden/a
Gas Systemn/aMid-Length
Lengthn/a14.5
Twistn/a1:7
Contourn/aStraight
Threadn/a1/2x28
Weightn/a26.6

Barrels frequently paired with the Cross Machine Tool Upur-3A Billet Side

Most picked next to it in real builds. Only parts our rules say fit the Cross Machine Tool Upur-3A Billet Side are listed.

Upper Receivers frequently paired with the Triarc Systems Track 2.0 5.56 Mid-Length

Most picked next to it in real builds. Only parts our rules say fit the Triarc Systems Track 2.0 5.56 Mid-Length are listed.