Does the Cross Machine Tool UHP15-a Billet work with the Triarc Systems Track 2.0 5.56 Mid-Length?

Cross Machine Tool Uhp15-a Billet Ambi Ar-15 Stripped Lower

Lower Receiver

Cross Machine Tool UHP15-a Billet Stripped Lower

Triarc Systems Track 2.0 5.56 Mid-Length Ar-15 Barrel - 14.5"

Barrel

Triarc Systems Track 2.0 5.56 Mid-Length

Cross Machine Tool lower and Triarc Systems barrel compatibility

Yes, they fit

The Cross Machine Tool UHP15-a Billet Stripped Lower works with the Triarc Systems Track 2.0 5.56 Mid-Length. Our compatibility rules found no conflict between them.

Checked by the same rules the AR builder runs on every part you add: caliber, frame size, receiver pattern, thread pitch and gas length.

Fit is judged from the specs retailers list, which can be missing or wrong. Confirm with the manufacturer before you buy, and have a qualified gunsmith check any build before you fire it.

How often builders pair the Cross Machine Tool lower and Triarc Systems barrel

Backed by thousands of qualified builds that have both a lower and a barrel.

Lower Receivers builders put under the Triarc Systems Track 2.0 5.56 Mid-Length

Share of builds with the Triarc Systems Track 2.0 5.56 Mid-Length and any lower

  • Cross Machine Tool UHP15-a Billet

    Not in enough builds yet to report.

  • Triarc Systems Track 2.0 5.56 Mid-Length

    Of barrel picks
    0.5%
    Median paid
    n/a
How we count ⌄

These shares come from GunPartPicker's build data: real parts lists people put together while planning a purchase, not sales or surveys. A build counts a part only when it is the final pick for its slot, so parts that were swapped out never count. Fit never comes from these numbers; it comes from our compatibility rules alone.

Frequently built with the Cross Machine Tool lower and Triarc Systems barrel

The part builders pick most often in each slot alongside these two, checked against both. Parts that conflict are left out.

Charging Handle

Handguard

Gas Block

Bolt Carrier Group

Upper Receiver

Trigger

Buffer

Pistol Grip

Muzzle Device

Light

Cross Machine Tool UHP15-a vs Triarc Systems Track 2.0 5.56: specs and prices

Cross Machine Tool UHP15-aTriarc Systems Track 2.0
Best pricen/an/a
Storesn/an/a
AssemblyStrippedn/a
PlatformAR-15n/a
Trigger Pin.154n/a
FinishHardcoat Anodizedn/a
Calibern/a5.56 NATO
Gas Systemn/aMid-Length
Lengthn/a14.5
Twistn/a1:7
Contourn/aStraight
Threadn/a1/2x28
Weightn/a26.6

Barrels most paired with Cross Machine Tool lowers

The Cross Machine Tool UHP15-a Billet is not in enough builds yet, so these are the most picked next to any Cross Machine Tool lower. Only parts our rules say fit the Cross Machine Tool UHP15-a Billet are listed.

Lower Receivers frequently paired with the Triarc Systems Track 2.0 5.56 Mid-Length

Most picked next to it in real builds. Only parts our rules say fit the Triarc Systems Track 2.0 5.56 Mid-Length are listed.