Does the Palmetto State Armory BLEM Sabre-15 work with the PSA 20" Rifle Length 1/7 Nitride 15"?
Lower Receiver
Palmetto State Armory BLEM Sabre-15 Stripped
from $119.99
Upper Receiver
PSA 20" Rifle Length 1/7 Nitride 15" Lightweight M-LOK Upper
Palmetto State Armory lower and Palmetto State Armory upper compatibility
Yes, they fit
The Palmetto State Armory BLEM Sabre-15 Stripped works with the PSA 20" Rifle Length 1/7 Nitride 15" Lightweight. Our compatibility rules found no conflict between them.
This exact setup is in a real GunPartPicker build.
Counted from real GunPartPicker builds: parts lists people put together while planning to buy.
Checked by the same rules the AR builder runs on every part you add: caliber, frame size, receiver pattern, thread pitch and gas length.
Fit is judged from the specs retailers list, which can be missing or wrong. Confirm with the manufacturer before you buy, and have a qualified gunsmith check any build before you fire it.
How often builders pair the Palmetto State Armory lower and Palmetto State Armory upper
Backed by tens of thousands of qualified builds that have both a lower and an upper.
Share of builds with the Palmetto State Armory BLEM Sabre-15 and any upper
- This pairPSA 20" Rifle Length 1/7 Nitride 15" Lightweight13%
- PSA Stripped13%
Palmetto State Armory BLEM Sabre-15
- Of lower picks
- 0%
- Median paid
- n/a
PSA 20" Rifle Length 1/7 Nitride 15"
Not in enough builds yet to report.
How we count ⌄
These shares come from GunPartPicker's build data: real parts lists people put together while planning a purchase, not sales or surveys. A build counts a part only when it is the final pick for its slot, so parts that were swapped out never count. Fit never comes from these numbers; it comes from our compatibility rules alone.
Frequently built with the Palmetto State Armory lower and Palmetto State Armory upper
The part builders pick most often in each slot alongside these two, checked against both. Parts that conflict are left out.
Charging Handle
Fits both
Bolt Carrier Group
PSA 5.56 Full-Auto Nitride MPI
Fits both
Barrel
Handguard
Pistol Grip
Palmetto State Armory BLEM vs PSA 20" Rifle Length 1/7: specs and prices
| Palmetto State Armory BLEM | PSA 20" Rifle Length 1/7 | |
|---|---|---|
| Best price | $119.99 at Palmetto State Armory | n/a |
| Stores | 1 of 1 in stock | n/a |
| Assembly | Stripped | Complete |
| Platform | AR-15 | AR-15 |
| Caliber | Multi | 5.56 NATO |
| Finish | Hardcoat Anodized | n/a |
| Gas System Length | n/a | Rifle |
| Length | n/a | 20 |
Today's best prices and 90 day price history
Every store we track for each part, cheapest in stock first. Prices are checked through the day.
Palmetto State Armory BLEM Sabre-15 Stripped
- Palmetto State Armory$119.99
PSA 20" Rifle Length 1/7 Nitride 15" Lightweight
No store lists it today.
Upper Receivers frequently paired with the Palmetto State Armory BLEM Sabre-15
Most picked next to it in real builds. Only parts our rules say fit the Palmetto State Armory BLEM Sabre-15 are listed.
Lower Receivers most paired with Palmetto State Armory uppers
The PSA 20" Rifle Length 1/7 Nitride 15" is not in enough builds yet, so these are the most picked next to any Palmetto State Armory upper. Only parts our rules say fit the PSA 20" Rifle Length 1/7 Nitride 15" are listed.
