Does the PSA 10.5" Carbine-Length 5.56 NATO 1/7 work with the Yankee Hill Machine?

PSA 10.5" Carbine-Length 5.56 NATO 1/7 Nitride 12" Slant M-lok Upper - With BCG, CH, & MBUS Sight Set - 5165449684

Upper Receiver

PSA 10.5" Carbine-Length 5.56 NATO 1/7 Nitride 12" Slant

Yankee Hill Machine Ar-15 Charging Handle

Charging Handle

Yankee Hill Machine

from $39.75

Palmetto State Armory upper and Yankee Hill Machine charging handle compatibility

Yes, they fit

The PSA 10.5" Carbine-Length 5.56 NATO 1/7 Nitride works with the Yankee Hill Machine. Our compatibility rules found no conflict between them.

This exact setup is in a real GunPartPicker build.

Counted from real GunPartPicker builds: parts lists people put together while planning to buy.

Checked by the same rules the AR builder runs on every part you add: caliber, frame size, receiver pattern, thread pitch and gas length.

Fit is judged from the specs retailers list, which can be missing or wrong. Confirm with the manufacturer before you buy, and have a qualified gunsmith check any build before you fire it.

How often builders pair the Palmetto State Armory upper and Yankee Hill Machine charging handle

Backed by tens of thousands of qualified builds that have both an upper and a charging handle.

Charging Handles builders put on the PSA 10.5" Carbine-Length 5.56 NATO 1/7

Share of builds with the PSA 10.5" Carbine-Length 5.56 NATO 1/7 and any charging handle

Upper Receivers builders put under the Yankee Hill Machine

Share of builds with the Yankee Hill Machine and any upper

  • PSA 10.5" Carbine-Length 5.56 NATO 1/7

    Of upper picks
    0%
    Median paid
    n/a

  • Yankee Hill Machine

    Of charging handle picks
    1.1%
    Median paid
    $40
How we count ⌄

These shares come from GunPartPicker's build data: real parts lists people put together while planning a purchase, not sales or surveys. A build counts a part only when it is the final pick for its slot, so parts that were swapped out never count. Fit never comes from these numbers; it comes from our compatibility rules alone.

Frequently built with the Palmetto State Armory upper and Yankee Hill Machine charging handle

The part builders pick most often in each slot alongside these two, checked against both. Parts that conflict are left out.

Barrel

Lower Receiver

Trigger

Gas Block

Bolt Carrier Group

Handguard

Pistol Grip

Stock & Brace

PSA 10.5" Carbine-Length 5.56 vs Yankee Hill Machine: specs and prices

PSA 10.5" Carbine-LengthYankee Hill Machine
Best pricen/a$39.75 at Primary Arms
Storesn/a1 of 1 in stock
AssemblyCompleten/a
PlatformAR-15AR-15
Gas System LengthCarbinen/a
Caliber5.56 NATOn/a
Length10.5n/a
Handn/aNon-Ambi
Materialn/aAluminum
Colorn/aBlack
Finishn/aHardcoat Anodized

Today's best prices and 90 day price history

Every store we track for each part, cheapest in stock first. Prices are checked through the day.

PSA 10.5" Carbine-Length 5.56 NATO 1/7 Nitride

No store lists it today.

Yankee Hill Machine

Price history, last 90 days

  • Yankee Hill Machine: lowest $39.75 on Jul 5, highest $39.75 on Jul 5 over the last 90 days.

Charging Handles most paired with Palmetto State Armory uppers

The PSA 10.5" Carbine-Length 5.56 NATO 1/7 is not in enough builds yet, so these are the most picked next to any Palmetto State Armory upper. Only parts our rules say fit the PSA 10.5" Carbine-Length 5.56 NATO 1/7 are listed.

Upper Receivers frequently paired with the Yankee Hill Machine

Most picked next to it in real builds. Only parts our rules say fit the Yankee Hill Machine are listed.