Does the PSA GEN2 KS-47 8.5" Pistol-Length work with the Rubber City Armory 7.62x39 Low Mass?

PSA Gen2 KS-47 8.5" Pistol-Length 7.62x39 1/10 Nitride 7" Lightweight M-Lok Upper With BCG & CH - TC-E Extractor

Upper Receiver

PSA GEN2 KS-47 8.5" Pistol-Length 7.62x39 1/10 Nitride 7"

Rubber City Armory 7.62x39 Low Mass Bolt Carrier Group - Nitride

Bolt Carrier Group

Rubber City Armory 7.62x39 Low Mass

from $199.00

Palmetto State Armory upper and Rubber City Armory bolt carrier group compatibility

Yes, they fit

The PSA GEN2 KS-47 8.5" Pistol-Length 7.62x39 1/10 works with the Rubber City Armory 7.62x39 Low Mass. Our compatibility rules found no conflict between them.

This exact setup has been built more than once on GunPartPicker.

Counted from real GunPartPicker builds: parts lists people put together while planning to buy.

Checked by the same rules the AR builder runs on every part you add: caliber, frame size, receiver pattern, thread pitch and gas length.

Fit is judged from the specs retailers list, which can be missing or wrong. Confirm with the manufacturer before you buy, and have a qualified gunsmith check any build before you fire it.

How often builders pair the Palmetto State Armory upper and Rubber City Armory bolt carrier group

Backed by thousands of qualified builds that have both an upper and a bolt carrier group.

Bolt Carrier Groups builders put on the PSA GEN2 KS-47 8.5" Pistol-Length

Share of builds with the PSA GEN2 KS-47 8.5" Pistol-Length and any bolt carrier group

Upper Receivers builders put under the Rubber City Armory 7.62x39 Low Mass

Share of builds with the Rubber City Armory 7.62x39 Low Mass and any upper

  • PSA GEN2 KS-47 8.5" Pistol-Length

    Of upper picks
    0%
    Median paid
    n/a

  • Rubber City Armory 7.62x39 Low Mass

    Of bolt carrier group picks
    0.1%
    Median paid
    n/a
How we count ⌄

These shares come from GunPartPicker's build data: real parts lists people put together while planning a purchase, not sales or surveys. A build counts a part only when it is the final pick for its slot, so parts that were swapped out never count. Fit never comes from these numbers; it comes from our compatibility rules alone.

Frequently built with the Palmetto State Armory upper and Rubber City Armory bolt carrier group

The part builders pick most often in each slot alongside these two, checked against both. Parts that conflict are left out.

Optic

Trigger

Charging Handle

Lower Receiver

Handguard

Barrel

Pistol Grip

Muzzle Device

Stock & Brace

Rifle Scope

PSA GEN2 KS-47 8.5" vs Rubber City Armory 7.62x39 Low: specs and prices

PSA GEN2 KS-47 8.5"Rubber City Armory 7.62x39
Best pricen/a$199.00 at Primary Arms
Storesn/a1 of 1 in stock
AssemblyCompleten/a
PlatformAR-15n/a
Gas System LengthPistoln/a
Caliber7.62x39mmn/a
Length8.5n/a
Cartridgen/a7.62x39mm
Stylen/aLow Mass Bolt Carrier
Finishn/aNitride

Today's best prices and 90 day price history

Every store we track for each part, cheapest in stock first. Prices are checked through the day.

PSA GEN2 KS-47 8.5" Pistol-Length 7.62x39 1/10

No store lists it today.

Rubber City Armory 7.62x39 Low Mass

Price history, last 90 days

  • Rubber City Armory 7.62x39 Low Mass: lowest $199.00 on Jul 6, highest $199.00 on Jul 6 over the last 90 days.

Bolt Carrier Groups most paired with Palmetto State Armory uppers

The PSA GEN2 KS-47 8.5" Pistol-Length is not in enough builds yet, so these are the most picked next to any Palmetto State Armory upper. Only parts our rules say fit the PSA GEN2 KS-47 8.5" Pistol-Length are listed.

Upper Receivers frequently paired with the Rubber City Armory 7.62x39 Low Mass

Most picked next to it in real builds. Only parts our rules say fit the Rubber City Armory 7.62x39 Low Mass are listed.