Does the PSA Sabre-15 Forged Lower work with the PSA 10.5" 5.56 NATO 1:7 12" Slant M-LOK?

PSA Sabre-15 Forged Lower with Sabre Stock and Grip, Gray

Lower Receiver

PSA Sabre-15 Forged Lower

PSA 10.5" 5.56 NATO 1:7 12" Slant M-LOK MOE EPT Shockwave Pistol Kit, Flat Dark Earth - 5165449598

Upper Receiver

PSA 10.5" 5.56 NATO 1:7 12" Slant M-LOK MOE EPT Shockwave

Palmetto State Armory lower and Palmetto State Armory upper compatibility

Yes, they fit

The PSA Sabre-15 Forged Lower works with the PSA 10.5" 5.56 NATO 1:7 12" Slant M-LOK MOE EPT. Our compatibility rules found no conflict between them.

This exact setup is in a real GunPartPicker build.

Counted from real GunPartPicker builds: parts lists people put together while planning to buy.

Checked by the same rules the AR builder runs on every part you add: caliber, frame size, receiver pattern, thread pitch and gas length.

Fit is judged from the specs retailers list, which can be missing or wrong. Confirm with the manufacturer before you buy, and have a qualified gunsmith check any build before you fire it.

How often builders pair the Palmetto State Armory lower and Palmetto State Armory upper

Backed by tens of thousands of qualified builds that have both a lower and an upper.

Upper Receivers builders put on the PSA Sabre-15 Forged Lower

Share of builds with the PSA Sabre-15 Forged Lower and any upper

  • PSA Sabre-15 Forged Lower

    Of lower picks
    0.1%
    Median paid
    n/a

  • PSA 10.5" 5.56 NATO 1:7 12" Slant M-LOK

    Not in enough builds yet to report.

How we count ⌄

These shares come from GunPartPicker's build data: real parts lists people put together while planning a purchase, not sales or surveys. A build counts a part only when it is the final pick for its slot, so parts that were swapped out never count. Fit never comes from these numbers; it comes from our compatibility rules alone.

Frequently built with the Palmetto State Armory lower and Palmetto State Armory upper

The part builders pick most often in each slot alongside these two, checked against both. Parts that conflict are left out.

Charging Handle

Bolt Carrier Group

Trigger

Optic

Barrel

Stock & Brace

Handguard

Pistol Grip

Suppressor

PSA Sabre-15 Forged Lower vs PSA 10.5" 5.56 NATO 1:7 12": specs and prices

PSA Sabre-15 Forged LowerPSA 10.5" 5.56 NATO 1:7 12"
Best pricen/an/a
Storesn/an/a
AssemblyCompleteComplete
PlatformAR-15AR-15
Caliber5.56 NATO5.56 NATO
Trigger Pin.154n/a
FinishHardcoat Anodizedn/a
ColorGrayn/a
Gas System Lengthn/aPistol
Lengthn/a10.5

Upper Receivers frequently paired with the PSA Sabre-15 Forged Lower

Most picked next to it in real builds. Only parts our rules say fit the PSA Sabre-15 Forged Lower are listed.

Lower Receivers most paired with Palmetto State Armory uppers

The PSA 10.5" 5.56 NATO 1:7 12" Slant M-LOK is not in enough builds yet, so these are the most picked next to any Palmetto State Armory upper. Only parts our rules say fit the PSA 10.5" 5.56 NATO 1:7 12" Slant M-LOK are listed.