Does the VLTOR Vra-RA5 work with the PSA GEN2 KS-47 8.5" Pistol-Length?

Vltor Vra-Ra5 Complete Ar-15 Lower Receiver With A5 Buffer System

Lower Receiver

VLTOR Vra-RA5

PSA Gen2 KS-47 8.5" Pistol-Length 7.62x39 1/10 Nitride 7" Lightweight M-Lok Upper With BCG & CH - TC-E Extractor

Upper Receiver

PSA GEN2 KS-47 8.5" Pistol-Length 7.62x39 1/10 Nitride 7"

VLTOR lower and Palmetto State Armory upper compatibility

Yes, they fit

The VLTOR Vra-RA5 works with the PSA GEN2 KS-47 8.5" Pistol-Length 7.62x39 1/10. Our compatibility rules found no conflict between them.

This exact setup is in a real GunPartPicker build.

Counted from real GunPartPicker builds: parts lists people put together while planning to buy.

Checked by the same rules the AR builder runs on every part you add: caliber, frame size, receiver pattern, thread pitch and gas length.

Fit is judged from the specs retailers list, which can be missing or wrong. Confirm with the manufacturer before you buy, and have a qualified gunsmith check any build before you fire it.

How often builders pair the VLTOR lower and Palmetto State Armory upper

Backed by tens of thousands of qualified builds that have both a lower and an upper.

Upper Receivers builders put on the VLTOR Vra-RA5

Share of builds with the VLTOR Vra-RA5 and any upper

Lower Receivers builders put under the PSA GEN2 KS-47 8.5" Pistol-Length

Share of builds with the PSA GEN2 KS-47 8.5" Pistol-Length and any lower

  • VLTOR Vra-RA5

    Of lower picks
    0.3%
    Median paid
    n/a

  • PSA GEN2 KS-47 8.5" Pistol-Length

    Of upper picks
    0%
    Median paid
    n/a
How we count ⌄

These shares come from GunPartPicker's build data: real parts lists people put together while planning a purchase, not sales or surveys. A build counts a part only when it is the final pick for its slot, so parts that were swapped out never count. Fit never comes from these numbers; it comes from our compatibility rules alone.

Frequently built with the VLTOR lower and Palmetto State Armory upper

The part builders pick most often in each slot alongside these two, checked against both. Parts that conflict are left out.

Handguard

Charging Handle

Stock & Brace

Barrel

Trigger

Gas Block

Bolt Carrier Group

Pistol Grip

Muzzle Device

Buffer Tube Assembly

VLTOR Vra-RA5 vs PSA GEN2 KS-47 8.5": specs and prices

VLTOR Vra-RA5PSA GEN2 KS-47 8.5"
Best pricen/an/a
Storesn/an/a
AssemblyCompleteComplete
PlatformAR-15AR-15
Trigger Pin.154n/a
FinishHardcoat Anodizedn/a
Gas System Lengthn/aPistol
Calibern/a7.62x39mm
Lengthn/a8.5

Upper Receivers frequently paired with the VLTOR Vra-RA5

Most picked next to it in real builds. Only parts our rules say fit the VLTOR Vra-RA5 are listed.

Lower Receivers frequently paired with the PSA GEN2 KS-47 8.5" Pistol-Length

Most picked next to it in real builds. Only parts our rules say fit the PSA GEN2 KS-47 8.5" Pistol-Length are listed.