Does the Palmetto State Armory BLEM PSA Classic work with the PSA 8.5" Pistol-length 300AAC Nitride 7"?

BLEM PSA AR15 Complete Classic Stealth Lower, Black

Lower Receiver

Palmetto State Armory BLEM PSA Classic Stealth Lower

PSA 8.5" Pistol-length 300AAC Nitride 7" Lightweight M-Lok Upper with BCG & CH

Upper Receiver

PSA 8.5" Pistol-length 300AAC Nitride 7" Lightweight M-LOK

Palmetto State Armory lower and Palmetto State Armory upper compatibility

Yes, they fit

The Palmetto State Armory BLEM PSA Classic Stealth works with the PSA 8.5" Pistol-length 300AAC Nitride 7". Our compatibility rules found no conflict between them.

No one has built this exact setup yet, but Palmetto State Armory lowers with Palmetto State Armory uppers are a common pairing.

Counted from real GunPartPicker builds: parts lists people put together while planning to buy.

Checked by the same rules the AR builder runs on every part you add: caliber, frame size, receiver pattern, thread pitch and gas length.

Fit is judged from the specs retailers list, which can be missing or wrong. Confirm with the manufacturer before you buy, and have a qualified gunsmith check any build before you fire it.

How often builders pair the Palmetto State Armory lower and Palmetto State Armory upper

Backed by tens of thousands of qualified builds that have both a lower and an upper.

Upper Receivers builders put on the Palmetto State Armory BLEM PSA Classic

Share of builds with the Palmetto State Armory BLEM PSA Classic and any upper

Lower Receivers builders put under the PSA 8.5" Pistol-length 300AAC Nitride 7"

Share of builds with the PSA 8.5" Pistol-length 300AAC Nitride 7" and any lower

  • Palmetto State Armory BLEM PSA Classic

    Of lower picks
    4.5%
    Median paid
    n/a

  • PSA 8.5" Pistol-length 300AAC Nitride 7"

    Of upper picks
    0%
    Median paid
    n/a
How we count ⌄

These shares come from GunPartPicker's build data: real parts lists people put together while planning a purchase, not sales or surveys. A build counts a part only when it is the final pick for its slot, so parts that were swapped out never count. Fit never comes from these numbers; it comes from our compatibility rules alone.

Frequently built with the Palmetto State Armory lower and Palmetto State Armory upper

The part builders pick most often in each slot alongside these two, checked against both. Parts that conflict are left out.

Trigger

Charging Handle

Bolt Carrier Group

Handguard

Stock & Brace

Optic

Gas Block

Barrel

Light

Palmetto State Armory BLEM PSA vs PSA 8.5" Pistol-length 300AAC: specs and prices

Palmetto State Armory BLEMPSA 8.5" Pistol-length
Best pricen/an/a
Storesn/an/a
AssemblyCompleteComplete
PlatformAR-15AR-15
CaliberMulti300 Blackout
Trigger Pin.154n/a
FinishHardcoat Anodizedn/a
ColorBlackn/a
Gas System Lengthn/aPistol
Lengthn/a8.5

Upper Receivers frequently paired with the Palmetto State Armory BLEM PSA Classic

Most picked next to it in real builds. Only parts our rules say fit the Palmetto State Armory BLEM PSA Classic are listed.

Lower Receivers frequently paired with the PSA 8.5" Pistol-length 300AAC Nitride 7"

Most picked next to it in real builds. Only parts our rules say fit the PSA 8.5" Pistol-length 300AAC Nitride 7" are listed.