Does the PSA 16" Mid-Length 5.56 NATO 1/7 Nitride work with the Yankee Hill Machine Co. 16.5" Threaded?

PSA 16" Mid-Length 5.56 NATO 1/7 Nitride Timber Creek Enforcer 13.5" M-Lok Upper - No BCG or CH

Upper Receiver

PSA 16" Mid-Length 5.56 NATO 1/7 Nitride Timber Creek

Yankee Hill Machine Co., Inc. Ar-15 16.5" Threaded Fluted Barrel 1-8 Twist

Barrel

Yankee Hill Machine Co. 16.5" Threaded Fluted 1-8 Twist

Palmetto State Armory upper and Yankee Hill Machine barrel compatibility

Yes, they fit

The PSA 16" Mid-Length 5.56 NATO 1/7 Nitride Timber works with the Yankee Hill Machine Co. 16.5" Threaded Fluted. Our compatibility rules found no conflict between them.

This exact setup has been built more than once on GunPartPicker.

Counted from real GunPartPicker builds: parts lists people put together while planning to buy.

Checked by the same rules the AR builder runs on every part you add: caliber, frame size, receiver pattern, thread pitch and gas length.

Fit is judged from the specs retailers list, which can be missing or wrong. Confirm with the manufacturer before you buy, and have a qualified gunsmith check any build before you fire it.

How often builders pair the Palmetto State Armory upper and Yankee Hill Machine barrel

Backed by thousands of qualified builds that have both an upper and a barrel.

Barrels builders put on the PSA 16" Mid-Length 5.56 NATO 1/7 Nitride

Share of builds with the PSA 16" Mid-Length 5.56 NATO 1/7 Nitride and any barrel

Upper Receivers builders put under the Yankee Hill Machine Co. 16.5" Threaded

Share of builds with the Yankee Hill Machine Co. 16.5" Threaded and any upper

  • PSA 16" Mid-Length 5.56 NATO 1/7 Nitride

    Of upper picks
    0.5%
    Median paid
    n/a

  • Yankee Hill Machine Co. 16.5" Threaded

    Of barrel picks
    2%
    Median paid
    n/a
How we count ⌄

These shares come from GunPartPicker's build data: real parts lists people put together while planning a purchase, not sales or surveys. A build counts a part only when it is the final pick for its slot, so parts that were swapped out never count. Fit never comes from these numbers; it comes from our compatibility rules alone.

Frequently built with the Palmetto State Armory upper and Yankee Hill Machine barrel

The part builders pick most often in each slot alongside these two, checked against both. Parts that conflict are left out.

Lower Receiver

Charging Handle

Trigger

Handguard

Pistol Grip

Gas Block

Bolt Carrier Group

PSA 16" Mid-Length 5.56 NATO vs Yankee Hill Machine Co. 16.5": specs and prices

PSA 16" Mid-Length 5.56 NATOYankee Hill Machine Co.
Best pricen/an/a
Storesn/an/a
AssemblyCompleten/a
PlatformAR-15n/a
Gas System LengthMid-Lengthn/a
Caliber5.56 NATO5.56 NATO
Length1616.5
Gas Systemn/aCarbine
Twistn/a1:8
Contourn/aFluted
Weightn/a1.81

Barrels frequently paired with the PSA 16" Mid-Length 5.56 NATO 1/7 Nitride

Most picked next to it in real builds. Only parts our rules say fit the PSA 16" Mid-Length 5.56 NATO 1/7 Nitride are listed.

Upper Receivers frequently paired with the Yankee Hill Machine Co. 16.5" Threaded

Most picked next to it in real builds. Only parts our rules say fit the Yankee Hill Machine Co. 16.5" Threaded are listed.