Gun Tools/Paint planner/Updated September 28, 2026

Two tone AK-47 Paint Job

Tan lower half, green upper, done in an afternoon on an AK-47. The pattern is painted on the gun below with real spray can colors; reroll it, change brands, or paint over it by hand.

Two tone on an AK-47, on a real photo

Reroll the layout, switch paint brands, or paint over it by hand. Render saves a picture with shadows, Share gives you a link.

Loading the AK-47...

Photo: AK-47 photo by the US government, mirrored by GunPartPicker, Public domain

Opens full screen. One finger paints, two fingers zoom.

Community

Community leaderboard

Paint jobs people made in the planner. Vote the best up, or submit your own.

Spray cans for a two tone AK-47

In spray order, lightest first. Either brand works; do not mix them in one job.

Krylon

  1. 1Camouflage Khaki
  2. 2Camouflage Olive

Rust-Oleum

  1. 1Camouflage Khaki
  2. 2Camouflage Deep Forest Green

How to spray two tone on an AK-47

  1. 1. Strip it down

    Take off the dust cover, recoil spring, bolt carrier and gas tube. Paint the dust cover off the rifle so it still seats.

  2. 2. Degrease everything

    Wipe every outside surface with acetone or isopropyl alcohol. Paint will not hold over gun oil.

  3. 3. Mask what moves

    Plug the chamber and muzzle, tape the magazine well, trigger, safety lever and rear sight leaf. Scuff the wood lightly first or paint only the metal.

  4. 4. Base coat in khaki

    Two light coats over the whole gun, 8 to 12 inches away, 10 minutes apart.

  5. 5. Lay the two tone pattern

    Tan lower half, green upper, done in an afternoon. Spray olive, light to dark, letting each color flash off before the next.

  6. 6. Let it cure

    Handle it after an hour but give it a full day before it goes in a case, and a few days before hard use.

More AK-47 paint jobs

Two tone on other guns

Frequently Asked Questions

What spray paint do you need for a two tone AK-47?

2 cans, sprayed in this order: Krylon Khaki, Olive; or Rust-Oleum Khaki, Deep Forest Green.

Can you rattle can two tone on an AK-47 yourself?

Yes. Strip and degrease the AK-47, mask what moves, lay the lightest color first and build the pattern light to dark with tape, stencils or netting. Plan on an afternoon plus a day to cure.

Cite this tool: GunPartPicker, “Two tone AK-47 Paint Job”, https://gunpartpicker.net/gun-paint-planner/ak-47/two-tone. Paint colors from the Krylon and Rust-Oleum color charts; gun photos credited under each gun. Free to cite with attribution.

More Gun Tools