Gun Tools/Paint planner/Updated September 28, 2026

Fade Block II Paint Job (CS2 Camo)

Yellow at one end fading through pink into purple on an M4A1 SOPMOD Block II. The look comes from CS2. The pattern is painted on the gun below with real spray can colors; reroll it, change brands, or paint over it by hand.

Fade on a Block II, on a real photo

Reroll the layout, switch paint brands, or paint over it by hand. Render saves a picture with shadows, Share gives you a link.

Loading the Block II...

Photo: M4A1 SOPMOD Block II photo by Sgt. James Stanfield, US Marine Corps, Public domain

Opens full screen. One finger paints, two fingers zoom.

Community

Community leaderboard

Paint jobs people made in the planner. Vote the best up, or submit your own.

Spray cans for a fade Block II

In spray order, lightest first. Either brand works; do not mix them in one job.

Krylon

  1. 1COLORmaxx Gloss Mambo Pink
  2. 2COLORmaxx Gloss Sun Yellow
  3. 3COLORmaxx Gloss Purple

Rust-Oleum

  1. 1Painter's Touch 2X Gloss Berry Pink
  2. 2Painter's Touch 2X Gloss Sun Yellow
  3. 3Painter's Touch 2X Gloss Purple

How to spray fade on a Block II

  1. 1. Strip it down

    Pull the bolt carrier group and charging handle, and split the upper from the lower. Take the optic off or plan to tape it.

  2. 2. Degrease everything

    Wipe every outside surface with acetone or isopropyl alcohol. Paint will not hold over gun oil.

  3. 3. Mask what moves

    Plug the chamber and muzzle, tape the ejection port, magazine well, trigger and safety, and cover the optic lenses.

  4. 4. Base coat in mambo pink

    Two light coats over the whole gun, 8 to 12 inches away, 10 minutes apart.

  5. 5. Soft sun yellow haze

    Mist soft patches of sun yellow from 12 to 18 inches, so the edges fade.

  6. 6. Soft purple haze

    Mist soft patches of purple from 12 to 18 inches, so the edges fade.

  7. 7. Let it cure

    Handle it after an hour but give it a full day before it goes in a case, and a few days before hard use.

More Block II paint jobs

Fade on other guns

Frequently Asked Questions

What spray paint do you need for a fade Block II?

3 cans, sprayed in this order: Krylon Gloss Mambo Pink, Gloss Sun Yellow, Gloss Purple; or Rust-Oleum Gloss Berry Pink, Gloss Sun Yellow, Gloss Purple.

Can you rattle can fade on a Block II yourself?

Yes. Strip and degrease the Block II, mask what moves, lay the lightest color first and build the pattern light to dark with tape, stencils or netting. Plan on an afternoon plus a day to cure.

Cite this tool: GunPartPicker, “Fade Block II Paint Job (CS2 Camo)”, https://gunpartpicker.net/gun-paint-planner/m4a1-block-2/fade. Paint colors from the Krylon and Rust-Oleum color charts; gun photos credited under each gun. Free to cite with attribution.

More Gun Tools