Gun Tools/Paint planner/Updated September 28, 2026

Asiimov M16A4 Paint Job (CS2 Camo)

White with black and orange angled panels on an M16A4 rifle. The look comes from CS2. The pattern is painted on the gun below with real spray can colors; reroll it, change brands, or paint over it by hand.

Asiimov on an M16A4, on a real photo

Reroll the layout, switch paint brands, or paint over it by hand. Render saves a picture with shadows, Share gives you a link.

Loading the M16A4...

Photo: M16A4 photo by US Army PEO Soldier, Public domain

Opens full screen. One finger paints, two fingers zoom.

Community

Community leaderboard

Paint jobs people made in the planner. Vote the best up, or submit your own.

Spray cans for an asiimov M16A4

In spray order, lightest first. Either brand works; do not mix them in one job.

Krylon

  1. 1COLORmaxx Flat White
  2. 2Camouflage Black
  3. 3COLORmaxx Gloss Pumpkin Orange

Rust-Oleum

  1. 1Painter's Touch 2X Flat White
  2. 2Camouflage Black
  3. 3Painter's Touch 2X Gloss Real Orange

How to spray asiimov on an M16A4

  1. 1. Strip it down

    Pull the bolt carrier group and charging handle, and split the upper from the lower. Take the optic off or plan to tape it.

  2. 2. Degrease everything

    Wipe every outside surface with acetone or isopropyl alcohol. Paint will not hold over gun oil.

  3. 3. Mask what moves

    Plug the chamber and muzzle, tape the ejection port, magazine well, trigger and safety, and cover the optic lenses.

  4. 4. Base coat in white

    Two light coats over the whole gun, 8 to 12 inches away, 10 minutes apart.

  5. 5. Black through a dazzle stencil

    Lay a dazzle stencil sheet on the gun and spray black through it.

  6. 6. Pumpkin orange through a dazzle stencil

    Lay a dazzle stencil sheet on the gun and spray pumpkin orange through it.

  7. 7. Let it cure

    Handle it after an hour but give it a full day before it goes in a case, and a few days before hard use.

More M16A4 paint jobs

Asiimov on other guns

Frequently Asked Questions

What spray paint do you need for an asiimov M16A4?

3 cans, sprayed in this order: Krylon Flat White, Black, Gloss Pumpkin Orange; or Rust-Oleum Flat White, Black, Gloss Real Orange.

Can you rattle can asiimov on an M16A4 yourself?

Yes. Strip and degrease the M16A4, mask what moves, lay the lightest color first and build the pattern light to dark with tape, stencils or netting. Plan on an afternoon plus a day to cure.

Cite this tool: GunPartPicker, “Asiimov M16A4 Paint Job (CS2 Camo)”, https://gunpartpicker.net/gun-paint-planner/m16a4/asiimov. Paint colors from the Krylon and Rust-Oleum color charts; gun photos credited under each gun. Free to cite with attribution.

More Gun Tools