Gun Tools/Paint planner/Updated September 28, 2026

Multi-terrain M24 Paint Job

Soft fades with small hard shapes on top on an M24 sniper rifle (Remington 700). The pattern is painted on the gun below with real spray can colors; reroll it, change brands, or paint over it by hand.

Multi-terrain on an M24, on a real photo

Reroll the layout, switch paint brands, or paint over it by hand. Render saves a picture with shadows, Share gives you a link.

Loading the M24...

Photo: M24 photo by the US Air Force, Public domain

Opens full screen. One finger paints, two fingers zoom.

Community

Community leaderboard

Paint jobs people made in the planner. Vote the best up, or submit your own.

Spray cans for a multi-terrain M24

In spray order, lightest first. Either brand works; do not mix them in one job.

Krylon

  1. 1Camouflage Sand
  2. 2Camouflage Woodland Light Green
  3. 3Camouflage Brown
  4. 4Camouflage Khaki
  5. 5Camouflage Olive

Rust-Oleum

  1. 1Camouflage Sand
  2. 2Camouflage Army Green
  3. 3Camouflage Earth Brown
  4. 4Camouflage Khaki
  5. 5Camouflage Deep Forest Green

How to spray multi-terrain on an M24

  1. 1. Strip it down

    Pull the bolt, take the barreled action out of the stock, and take the scope off or bag it. The stock and the barreled action paint best apart.

  2. 2. Degrease everything

    Wipe every outside surface with acetone or isopropyl alcohol. Paint will not hold over gun oil.

  3. 3. Mask what moves

    Plug the chamber and muzzle, tape the bolt raceway, the magazine well, the trigger and the scope lenses and turrets. Leave the inletting where the action sits bare.

  4. 4. Base coat in sand

    Two light coats over the whole gun, 8 to 12 inches away, 10 minutes apart.

  5. 5. Lay the multi-terrain pattern

    Soft fades with small hard shapes on top. Spray woodland light green, then brown, then khaki, then olive, light to dark, letting each color flash off before the next.

  6. 6. Let it cure

    Handle it after an hour but give it a full day before it goes in a case, and a few days before hard use.

More M24 paint jobs

Multi-terrain on other guns

Frequently Asked Questions

What spray paint do you need for a multi-terrain M24?

5 cans, sprayed in this order: Krylon Sand, Woodland Light Green, Brown, Khaki, Olive; or Rust-Oleum Sand, Army Green, Earth Brown, Khaki, Deep Forest Green.

Can you rattle can multi-terrain on an M24 yourself?

Yes. Strip and degrease the M24, mask what moves, lay the lightest color first and build the pattern light to dark with tape, stencils or netting. Plan on an afternoon plus a day to cure.

Cite this tool: GunPartPicker, “Multi-terrain M24 Paint Job”, https://gunpartpicker.net/gun-paint-planner/m24/multi-terrain. Paint colors from the Krylon and Rust-Oleum color charts; gun photos credited under each gun. Free to cite with attribution.

More Gun Tools