Gun Tools/Paint planner/Updated September 28, 2026

Arctic PSA PA-15 Paint Job (MW2 Camo)

White with soft gray blotches and black flecks on a PSA PA-15 M4 carbine. The look comes from MW2. The pattern is painted on the gun below with real spray can colors; reroll it, change brands, or paint over it by hand.

Arctic on a PSA PA-15, on a real photo

Reroll the layout, switch paint brands, or paint over it by hand. Render saves a picture with shadows, Share gives you a link.

Loading the PSA PA-15...
See prices for the PSA PA-15 M4 carbinePhoto from the retailer listing

Opens full screen. One finger paints, two fingers zoom.

Community

Community leaderboard

Paint jobs people made in the planner. Vote the best up, or submit your own.

Spray cans for an arctic PSA PA-15

In spray order, lightest first. Either brand works; do not mix them in one job.

Krylon

  1. 1COLORmaxx Flat White
  2. 2COLORmaxx Gloss Smoke Gray
  3. 3Camouflage Black

Rust-Oleum

  1. 1Painter's Touch 2X Flat White
  2. 2Painter's Touch 2X Gloss Winter Gray
  3. 3Camouflage Black

How to spray arctic on a PSA PA-15

  1. 1. Strip it down

    Pull the bolt carrier group and charging handle, and split the upper from the lower. Take the optic off or plan to tape it.

  2. 2. Degrease everything

    Wipe every outside surface with acetone or isopropyl alcohol. Paint will not hold over gun oil.

  3. 3. Mask what moves

    Plug the chamber and muzzle, tape the ejection port, magazine well, trigger and safety, and cover the optic lenses.

  4. 4. Base coat in white

    Two light coats over the whole gun, 8 to 12 inches away, 10 minutes apart.

  5. 5. Smoke gray blotches

    Hold cardboard blotch cutouts just off the surface and spray smoke gray around their edges for hard edged blotches.

  6. 6. Black specks

    Flick small specks of black: a short burst from a foot away, or a stiff brush dipped in paint.

  7. 7. Let it cure

    Handle it after an hour but give it a full day before it goes in a case, and a few days before hard use.

More PSA PA-15 paint jobs

Arctic on other guns

Frequently Asked Questions

What spray paint do you need for an arctic PSA PA-15?

3 cans, sprayed in this order: Krylon Flat White, Gloss Smoke Gray, Black; or Rust-Oleum Flat White, Gloss Winter Gray, Black.

Can you rattle can arctic on a PSA PA-15 yourself?

Yes. Strip and degrease the PSA PA-15, mask what moves, lay the lightest color first and build the pattern light to dark with tape, stencils or netting. Plan on an afternoon plus a day to cure.

Cite this tool: GunPartPicker, “Arctic PSA PA-15 Paint Job (MW2 Camo)”, https://gunpartpicker.net/gun-paint-planner/psa-pa-15/arctic. Paint colors from the Krylon and Rust-Oleum color charts; gun photos credited under each gun. Free to cite with attribution.

More Gun Tools