Gun Tools/Paint planner/Updated September 28, 2026

Red Tiger PSA PA-15 Paint Job (CoD4, MW2 Camo)

Bold black tiger stripes over bright red, the unlock everyone chased on a PSA PA-15 M4 carbine. The look comes from CoD4, MW2. The pattern is painted on the gun below with real spray can colors; reroll it, change brands, or paint over it by hand.

Red Tiger on a PSA PA-15, on a real photo

Reroll the layout, switch paint brands, or paint over it by hand. Render saves a picture with shadows, Share gives you a link.

Loading the PSA PA-15...
See prices for the PSA PA-15 M4 carbinePhoto from the retailer listing

Opens full screen. One finger paints, two fingers zoom.

Community

Community leaderboard

Paint jobs people made in the planner. Vote the best up, or submit your own.

Spray cans for a red tiger PSA PA-15

In spray order, lightest first. Either brand works; do not mix them in one job.

Krylon

  1. 1COLORmaxx Gloss Banner Red
  2. 2Camouflage Black

Rust-Oleum

  1. 1Painter's Touch 2X Gloss Apple Red
  2. 2Camouflage Black

How to spray red tiger on a PSA PA-15

  1. 1. Strip it down

    Pull the bolt carrier group and charging handle, and split the upper from the lower. Take the optic off or plan to tape it.

  2. 2. Degrease everything

    Wipe every outside surface with acetone or isopropyl alcohol. Paint will not hold over gun oil.

  3. 3. Mask what moves

    Plug the chamber and muzzle, tape the ejection port, magazine well, trigger and safety, and cover the optic lenses.

  4. 4. Base coat in banner red

    Two light coats over the whole gun, 8 to 12 inches away, 10 minutes apart.

  5. 5. Soft black haze

    Mist soft patches of black from 12 to 18 inches, so the edges fade.

  6. 6. Black tiger stripes

    Cut tiger stripe shapes from painter's tape or a stencil sheet: thick in the middle, pointed at both ends, leaning steeply across the gun. Spray black.

  7. 7. Black tiger stripes

    Cut tiger stripe shapes from painter's tape or a stencil sheet: thick in the middle, pointed at both ends, leaning steeply across the gun. Spray black.

  8. 8. Let it cure

    Handle it after an hour but give it a full day before it goes in a case, and a few days before hard use.

More PSA PA-15 paint jobs

Red Tiger on other guns

Frequently Asked Questions

What spray paint do you need for a red tiger PSA PA-15?

2 cans, sprayed in this order: Krylon Gloss Banner Red, Black; or Rust-Oleum Gloss Apple Red, Black.

Can you rattle can red tiger on a PSA PA-15 yourself?

Yes. Strip and degrease the PSA PA-15, mask what moves, lay the lightest color first and build the pattern light to dark with tape, stencils or netting. Plan on an afternoon plus a day to cure.

Cite this tool: GunPartPicker, “Red Tiger PSA PA-15 Paint Job (CoD4, MW2 Camo)”, https://gunpartpicker.net/gun-paint-planner/psa-pa-15/red-tiger. Paint colors from the Krylon and Rust-Oleum color charts; gun photos credited under each gun. Free to cite with attribution.

More Gun Tools