Gun Paint Planner·Updated September 28, 2026

English

Rattle Can Hot Rod Flames Sig M400 Paint Job

Red, orange and yellow flames over black on a Sig Sauer M400. The pattern is painted on the gun below with real spray can colors; reroll it, change brands, or paint over it by hand.

Hot Rod Flames on a Sig M400, on a real photo

Reroll the layout, switch paint brands, or paint over it by hand. Render saves a picture with shadows, Share gives you a link.

Rattle can Hot Rod Flames Sig M400 paint job, painted in Krylon camo colors
Loading the Sig M400...

Sig Sauer M400 prices · Photo from the retailer listing

Community

Rattlecanned guns leaderboard

Paint jobs people made in the planner. Vote the best up, or submit your own.

Spray cans for a hot rod flames Sig M400

In spray order, lightest first. Either brand works; do not mix them in one job.

Rattle can Hot Rod Flames Sig M400 paint job, painted in Krylon camo colors
Hot Rod Flames on a Sig M400 in Krylon camo colors: the finished look these cans give you.

Krylon

  1. 1Camouflage Black
  2. 2COLORmaxx Gloss Banner Red
  3. 3COLORmaxx Gloss Pumpkin Orange
  4. 4COLORmaxx Gloss Sun Yellow

Rust-Oleum

  1. 1Camouflage Black
  2. 2Painter's Touch 2X Gloss Apple Red
  3. 3Painter's Touch 2X Gloss Real Orange
  4. 4Painter's Touch 2X Gloss Sun Yellow

How to spray hot rod flames on a Sig M400

  1. 1. Strip it down

    Pull the bolt carrier group and charging handle, and split the upper from the lower. Take the optic off or plan to tape it.

  2. 2. Degrease everything

    Wipe every outside surface with acetone or isopropyl alcohol. Paint will not hold over gun oil.

  3. 3. Mask what moves

    Plug the chamber and muzzle, tape the ejection port, magazine well, trigger and safety, and cover the optic lenses.

  4. 4. Base coat in black

    Two light coats over the whole gun, 8 to 12 inches away, 10 minutes apart.

  5. 5. Banner red through a flames stencil

    Lay a flames stencil sheet on the gun and spray banner red through it.

  6. 6. Pumpkin orange through a flames stencil

    Lay a flames stencil sheet on the gun and spray pumpkin orange through it.

  7. 7. Sun yellow through a flames stencil

    Lay a flames stencil sheet on the gun and spray sun yellow through it.

  8. 8. Let it cure

    Handle it after an hour but give it a full day before it goes in a case, and a few days before hard use.

More Sig M400 paint ideas and paint jobs

Hot Rod Flames on other guns

Frequently Asked Questions

What spray paint do you need for a hot rod flames Sig M400?

4 cans, sprayed in this order: Krylon Black, Gloss Banner Red, Gloss Pumpkin Orange, Gloss Sun Yellow; or Rust-Oleum Black, Gloss Apple Red, Gloss Real Orange, Gloss Sun Yellow.

Can you rattle can hot rod flames on a Sig M400 yourself?

Yes. Strip and degrease the Sig M400, mask what moves, lay the lightest color first and build the pattern light to dark with tape, stencils or netting. Plan on an afternoon plus a day to cure.

Cite this tool: GunPartPicker, “Rattle Can Hot Rod Flames Sig M400 Paint Job”, https://gunpartpicker.net/gun-paint-planner/sig-m400/hot-rod-flames. Paint colors from the Krylon and Rust-Oleum color charts; gun photos credited under each gun. Free to cite with attribution.

More Gun Tools