Gun Tools/Paint planner/Updated September 28, 2026
Redline Sig M400 Paint Job (CS2 Camo)
Black with thin red and gray racing lines on a Sig Sauer M400. The look comes from CS2. The pattern is painted on the gun below with real spray can colors; reroll it, change brands, or paint over it by hand.
Redline on a Sig M400, on a real photo
Reroll the layout, switch paint brands, or paint over it by hand. Render saves a picture with shadows, Share gives you a link.
Opens full screen. One finger paints, two fingers zoom.
Community
Community leaderboard
Paint jobs people made in the planner. Vote the best up, or submit your own.
Spray cans for a redline Sig M400
In spray order, lightest first. Either brand works; do not mix them in one job.
Krylon
- 1Camouflage Black
- 2COLORmaxx Gloss Banner Red
- 3COLORmaxx Gloss Smoke Gray
Rust-Oleum
- 1Camouflage Black
- 2Painter's Touch 2X Gloss Apple Red
- 3Painter's Touch 2X Gloss Winter Gray
How to spray redline on a Sig M400
1. Strip it down
Pull the bolt carrier group and charging handle, and split the upper from the lower. Take the optic off or plan to tape it.
2. Degrease everything
Wipe every outside surface with acetone or isopropyl alcohol. Paint will not hold over gun oil.
3. Mask what moves
Plug the chamber and muzzle, tape the ejection port, magazine well, trigger and safety, and cover the optic lenses.
4. Base coat in black
Two light coats over the whole gun, 8 to 12 inches away, 10 minutes apart.
5. Banner red stripes
Tape off or freehand long stripes and spray banner red.
6. Smoke gray stripes
Tape off or freehand long stripes and spray smoke gray.
7. Let it cure
Handle it after an hour but give it a full day before it goes in a case, and a few days before hard use.
More Sig M400 paint jobs
- Tiger stripe Sig M400
- M81 woodland Sig M400
- Chocolate chip Sig M400
- Snakeskin bands Sig M400
- OD green, tan mag Sig M400
- Desert blotch Sig M400
- Multi-terrain Sig M400
- Flecktarn dots Sig M400
- Digital woodland Sig M400
- Splinter Sig M400
- Two tone Sig M400
- Red Tiger Sig M400
- Blue Tiger Sig M400
- Golden Sig M400
- Arctic Sig M400
- Fall Sig M400
- Diamond Sig M400
- Dragon Sig M400
- Dark Matter Sig M400
- Damascus Sig M400
- Asiimov Sig M400
- Fade Sig M400
- Hyper Beast Sig M400
- Galaxy Sig M400
- Hot Rod Flames Sig M400
- All Sig M400 ideas
Redline on other guns
Frequently Asked Questions
What spray paint do you need for a redline Sig M400?
3 cans, sprayed in this order: Krylon Black, Gloss Banner Red, Gloss Smoke Gray; or Rust-Oleum Black, Gloss Apple Red, Gloss Winter Gray.
Can you rattle can redline on a Sig M400 yourself?
Yes. Strip and degrease the Sig M400, mask what moves, lay the lightest color first and build the pattern light to dark with tape, stencils or netting. Plan on an afternoon plus a day to cure.
Cite this tool: GunPartPicker, “Redline Sig M400 Paint Job (CS2 Camo)”, https://gunpartpicker.net/gun-paint-planner/sig-m400/redline. Paint colors from the Krylon and Rust-Oleum color charts; gun photos credited under each gun. Free to cite with attribution.
Read next
All guides →More Gun Tools
- PlanningAR Build Cost CalculatorHow much does it cost to build an AR-15? Pick caliber, barrel length, stock or brace and optic, then drag both edges of the price band from the cheap end to the top end. Every slot fills with the part builders add most that is in stock, priced live. The headline total is the core rifle, optics and extras are priced separately, and beside them sits what builders really pay per slot, measured from real part picks. Roll a random build, or open yours in the builder in one click. Computed from over 1 million AR parts selected on GunPartPicker since 2020.
- CompatibilityGlock Size ComparisonPick any two Glocks and see them to scale as real photos sized to Glock's published dimensions, side by side, from behind and as an X-ray, with the difference in length, height, width and weight in one line and the pistols in stock for each.
- LegalGun Travel CheckerCan I bring my gun to another state? Pick where you start, where you are going and what is coming along: carry pistol, AR-15, magazines, suppressor, SBR, brace, forced reset or binary trigger, hollow points. Every state on the route is checked for transporting firearms across state lines: magazine limits, assault weapon bans, NFA rules, carry permit type and trigger bans, with what to do before the state line.
- CompatibilityMuzzle Thread CheckerPick your barrel's caliber and platform, get the standard thread pitch, and see every muzzle device and suppressor in the catalog that actually threads on, with live prices.
- CompatibilityFRT and Binary Trigger PickerChoose your platform and see every forced reset trigger, binary trigger and Super Safety the catalog carries for it, what the host needs to run one, and where each is in stock.
- CompatibilityGlock Red Dot Fit CheckerPick how your Glock slide is cut and see which red dots mount directly, which need a plate, and the plates and optics in stock right now.
- TuningTwist Rate CalculatorPick a bullet and a twist rate, get the Miller stability factor, then see barrels with that twist and ammo loaded with that bullet, with today's price per round.
- TuningBuffer Weight CalculatorEnter your gas system, barrel length, buffer tube and ammo, add a suppressor or a fast trigger, and get the buffer weight to start with plus the buffers in stock that match.
- LegalBarrel and Overall Length CheckerEnter barrel length, muzzle device and how the back end is configured, and see whether the build is a rifle, a short barreled rifle, a pistol or an AOW under federal law, with the barrels in stock at that length.

