Gun Paint Planner·Updated September 28, 2026
Rattle Can Redline: the CS2 Skin on a Real AR-15, AK-47 and Glock
Redline is the CS:GO skin that puts a thin red racing pinstripe on black carbon fiber, best known on the AK-47. EmKay designed it in 2013. Here it is painted with real spray can colors on 12 real guns. Pick yours to open it in the planner, then reroll the layout or paint over it by hand.
Quick answer
- The Redline skin comes from CS2.
- It takes 3 spray cans: Black, Gloss Banner Red, Gloss Smoke Gray.
- Spray it light to dark: Black first, Gloss Smoke Gray last.
Cans and spray order from the Krylon and Rust-Oleum color charts, matched in GunPartPicker's paint planner.
The Redline skin on 12 real guns
Where the Redline skin comes from
EmKay submitted it to the Steam Workshop in November 2013 under the name Elegant-Red. Valve renamed it Redline.
The AWP Redline came first, in the Winter Offensive case on 18 December 2013. The AK-47 Redline followed in the Operation Phoenix case on 20 February 2014.
Valve's description: carbon fiber hydrographic with a red pinstripe decal. The stock and handguard stay solid black.
The AK-47 Redline is one of the most recognized affordable skins. In October 2026 a Field-Tested AK listed around $32 on the Steam Market.
- Game
- CS:GO (2013), now CS2
- Artist
- EmKay
- First case
- Winter Offensive (AWP), Operation Phoenix (AK-47)
- Look
- Black carbon fiber, red pinstripe
Spray cans for a Redline paint job
In spray order, lightest first. Either brand works; do not mix them in one job.
Krylon
- 1Camouflage Black
- 2COLORmaxx Gloss Banner Red
- 3COLORmaxx Gloss Smoke Gray
Rust-Oleum
- 1Camouflage Black
- 2Painter's Touch 2X Gloss Apple Red
- 3Painter's Touch 2X Gloss Winter Gray
Painting a Redline on a real gun
Black base, then thin lines. Use 1/8 inch pinstripe tape or vinyl masking to mark the lines, mask everything else, and spray Krylon Gloss Banner Red.
Add a few Gloss Smoke Gray lines beside the red. For the carbon look, spray gray through fine mesh before the stripes, very light.
We'd measure the stripes from a screenshot of the AK so the spacing looks right. You can't fix a crooked pinstripe without masking again.
How to spray Redline on a gun
1. Strip it down
On an AR pull the bolt carrier group and split the upper and lower. On an AK take off the dust cover and bolt carrier. On a Glock take the slide off. Remove the optic or plan to tape it.
2. Degrease everything
Wipe every outside surface with acetone or isopropyl alcohol. Paint will not hold over gun oil.
3. Mask what moves
Plug the chamber and muzzle, tape the ejection port, magazine well, trigger and safety, and cover the optic lenses.
4. Base coat in black
Two light coats over the whole gun, 8 to 12 inches away, 10 minutes apart.
5. Banner red stripes
Tape off or freehand long stripes and spray banner red.
6. Smoke gray stripes
Tape off or freehand long stripes and spray smoke gray.
7. Let it cure
Handle it after an hour but give it a full day before it goes in a case, and a few days before hard use.
More gun skins from games
- Red Tiger (Call of Duty)
- Blue Tiger (Call of Duty)
- Golden (Call of Duty 4)
- Arctic (Modern Warfare 2)
- Fall (Modern Warfare 2)
- Dragon (Black Ops 2)
- Damascus (Modern Warfare 2019)
- Dark Matter (Black Ops 3)
- Diamond (Black Ops 2)
- Asiimov (CS2)
- Fade (CS2)
- Hyper Beast (CS2)
- Galaxy (Fortnite)
- Real camo patterns
- All gun skins
- Gun Paint Planner
Frequently Asked Questions
Who made the Redline skin?
EmKay, a Steam Workshop artist. It was submitted in November 2013 as Elegant-Red.
When did the AK-47 Redline come out?
On 20 February 2014, in the Operation Phoenix weapon case. The AWP Redline came first, in December 2013.
What spray paint do you need for a Redline paint job?
3 cans of Krylon, sprayed in this order: Black, Gloss Banner Red, Gloss Smoke Gray. Rust-Oleum has a match for every color.
Can you paint the Redline skin on a real gun?
Yes. Strip and degrease the gun, mask the bore, chamber and anything that moves, lay the lightest color first and build the look light to dark with tape and stencils. Plan on an afternoon plus a day to cure.
Cite this tool: GunPartPicker, “Rattle Can Redline: the CS2 Skin on a Real AR-15, AK-47 and Glock”, https://gunpartpicker.net/gun-paint-planner/skins/redline. Paint colors from the Krylon and Rust-Oleum color charts; gun photos credited on each gun's page. Free to cite with attribution.
Read next
All guides →
More Gun Tools
- PlanningAR Build Cost CalculatorHow much does it cost to build an AR-15? Pick caliber, barrel length, stock or brace and optic, then drag both edges of the price band from the cheap end to the top end. Every slot fills with the part builders add most that is in stock, priced live. The headline total is the core rifle, optics and extras are priced separately, and beside them sits what builders really pay per slot, measured from real part picks. Roll a random build, or open yours in the builder in one click. Computed from over 1 million AR parts selected on GunPartPicker since 2020.
- CompatibilityGlock Size ComparisonPick any two Glocks and see them to scale as real photos sized to Glock's published dimensions, side by side, from behind and as an X-ray, with the difference in length, height, width and weight in one line and the pistols in stock for each.
- LegalGun Travel CheckerCan I bring my gun to another state? Pick where you start, where you are going and what is coming along: carry pistol, AR-15, magazines, suppressor, SBR, brace, forced reset or binary trigger, hollow points. Every state on the route is checked for transporting firearms across state lines: magazine limits, assault weapon bans, NFA rules, carry permit type and trigger bans, with what to do before the state line.
- CompatibilityMuzzle Thread CheckerPick your barrel's caliber and platform, get the standard thread pitch, and see every muzzle device and suppressor in the catalog that actually threads on, with live prices.
- CompatibilityFRT and Binary Trigger PickerChoose your platform and see every forced reset trigger, binary trigger and Super Safety the catalog carries for it, what the host needs to run one, and where each is in stock.
- CompatibilityGlock Red Dot Fit CheckerPick how your Glock slide is cut and see which red dots mount directly, which need a plate, and the plates and optics in stock right now.
- CompatibilityP385 Size ComparisonSee the SIG P385 CARRY, COMP and FULL to scale against the P365-XMACRO, the P320 and the Glock 19, 17, 45 and 43X, as real photos sized to the published length and height, with every dimension and where to order one.
- TuningTwist Rate CalculatorPick a bullet and a twist rate, get the Miller stability factor, then see barrels with that twist and ammo loaded with that bullet, with today's price per round.
- TuningBuffer Weight CalculatorEnter your gas system, barrel length, buffer tube and ammo, add a suppressor or a fast trigger, and get the buffer weight to start with plus the buffers in stock that match.
- LegalBarrel and Overall Length CheckerEnter barrel length, muzzle device and how the back end is configured, and see whether the build is a rifle, a short barreled rifle, a pistol or an AOW under federal law, with the barrels in stock at that length.
- LegalSBR Planner (3D)Set the barrel anywhere from 7.5 to 16 inches, put a stock, a brace or a folder on the back, pin a muzzle device or slide on a can. The ruler under the rifle shows whether you've cleared the 16 inch barrel line and the 26 inch overall line. Pick your state for its SBR, suppressor and assault weapon rules, then price every part and open the build in one click.
- PlanningNight VisionLook around a real 360 degree scene through Gen 1, Gen 2+, Gen 3 green and white phosphor tubes, digital night vision and thermal. Turn the moon down from full to overcast, switch on an IR light, compare two devices side by side. Or walk a 3D farm at night and spot the people, hogs and deer hiding in it. Then see the PVS-14, PVS-31, GPNVG-18 and the thermal scopes people buy, with prices.