SilencerCo ASR Mount: How It Works and What Fits
ASR is SilencerCo's quick detach mount. The can threads on, seats on a taper, and a spring loaded lock ring keeps it from backing off. See it go on in 3D, then the ASR mounts and cans in stock.
Quick answer
- ASR (SilencerCo): SilencerCo's Active Spring Retention: a spring lock ring holds it.
- The GunPartPicker catalog lists 32 ASR mounts and adapters and 1 cans that ship on ASR in stock right now.
- ASR cans only seat on ASR mounts. None of the quick detach systems interchange.
Source: GunPartPicker catalog and build data, prices checked October 28, 2026.
How the ASR mount works, in 3D
Pick a system. Drag to turn it, take the can off to see the mount, or cut it open to see the threads, the taper and the baffles. Try a can from another system to see why they don't swap.
ASR mount + SilencerCo Velos LBPSilencerCo · 1/2x28
- Mount
- ASR (SilencerCo)
- Suppressor
- SilencerCo Velos LBP
- Barrel
- 11.5" SBR
- Mount adds
- 2.5", mostly in the can
- Rifle, no can
- 31.2" overall
- With the can on
- 36" overall
Overall length with the M4 stock extended. With the ASR can builders add most, the SilencerCo Velos LBP 556 Rifle Suppressor, Black, whose listing gives no length, counted at a typical 6.5".
- No can, 5.56 AR165 dB
- Dead Air Sandman X142 dB−23
- SureFire SOCOM RC2137.7 dB−27
- SilencerCo Velos LBP137.1 dB−28
- SilencerCo Omega 300130.1 dB−35
- HUXWRX Flow 556Kno published figure
Dashed line: 140 dB, the peak OSHA and NIOSH set for unprotected impulse noise. Every 10 dB is ten times the sound energy. Even suppressed, a short 5.56 sits near or above the line, so keep hearing protection on. Makers meter at the muzzle or at the ear, on different barrels; each row says how: No can, 5.56 AR about 165 dB from a 16" barrel; an SBR's shorter barrel is louder still; Dead Air Sandman X at the muzzle, 10.3" Mk18, MIL-STD-1474E (139 dB at the ear); SureFire SOCOM RC2 at the shooter's ear, 10.3" barrel, M855 (134.7 dB from 16"); SilencerCo Velos LBP muzzle average, 5.56 NATO, host not stated; SilencerCo Omega 300 muzzle average, 5.56 NATO, host not stated; HUB rear, also sold direct thread; HUXWRX Flow 556K hUXWRX publishes no dB figure; its pitch is less gas back at the shooter.
SilencerCo's Active Spring Retention: a spring lock ring holds it.
- On the barrel
- An ASR flash hider, brake or mount on the barrel threads.
- On the can
- An ASR rear mount (or ASR HUB adapter) with a spring loaded lock ring.
- How it locks
- The can threads onto the mount and seats on its taper; the lock ring sets a spring loaded cam against the mount's teeth so it can't back off. Turn the lock ring to release the cam, then unscrew it.
- Mount cost and length
- About $90 to $150 a mount, which sits about 2.5" past the barrel shoulder, mostly inside the can.
Why people pick it
- Threads on, so it pulls tight against the taper
- The lock ring can't let it walk off under fire
- Flash hider, brake and plain mount options
What to know first
- Only SilencerCo's ASR cans and adapters fit
- More turns to take off than a lever QD
- The lock ring teeth need to be kept clean
Cans on it: SilencerCo Velos LBP; SilencerCo Omega 300 with the ASR adapter; SilencerCo Hybrid 46M with the ASR adapter.
ASR mounts for 1/2x28 barrels
1/2x28 fits 5.56, .223, .22 LR and most 9mm.
Ranked by what builders add most, in stock first. One listing per model.
Suppressors on ASR
| Can | Length | Weight | Sound | Rifle with it on | Price |
|---|---|---|---|---|---|
| SilencerCo Velos LBP 556 Rifle Suppressor, Black | n/a | n/a | n/a | n/a | $998 |
From each listing; n/a means the listing doesn't say. Sound is the maker's figure: a reduction (-30 dB) or a meter reading (134 dB). Rifle with it on: an 11.5" SBR, M4 stock extended.
Ranked by what builders add most, in stock first. One listing per model.
Every suppressor →
What are the suppressor mount types?
Five quick detach and thread-on systems carry most rifle cans, plus plain direct thread. Each one is a part on the barrel and a matching part on the can.
| System | Maker | On the barrel | On the can | Mount price |
|---|---|---|---|---|
| Direct thread | Open standard | Nothing. The barrel's own muzzle threads, with a thread protector when the can is off. | Female threads in the rear cap, cut to the barrel's pitch, or a direct thread HUB adapter. | None |
| HUB 1.375x24 | Open standard | Whatever the adapter on the can calls for: barrel threads, an ASR mount, a KeyMo mount or a taper mount. | A removable rear cap (the HUB adapter) on 1.375x24 threads. | $60 to $180 |
| ASR | SilencerCo | An ASR flash hider, brake or mount on the barrel threads. | An ASR rear mount (or ASR HUB adapter) with a spring loaded lock ring. | $90 to $150 |
| KeyMo | Dead Air | A KeyMo flash hider, brake or mount on the barrel threads. | A KeyMo rear mount (or KeyMo HUB adapter) with a spring detent ring. | $80 to $140 |
| Fast-Attach | SureFire | A SureFire flash hider (SF3P, SF4P), brake or WarComp on the barrel threads. | A SureFire SOCOM or RC2 rear with a ratcheting lock ring and a release latch. | $110 to $200 |
| HUXWRX QD | HUXWRX | A HUXWRX QD flash hider, brake or mount (the old OSS style) on the barrel threads. | The QD interface built into the back of a Flow can. | $90 to $160 |
Will my suppressor fit another brand's mount?
Almost never. Read across from the can to the mount on your rifle. HUB cans are the exception: swap the rear adapter and the can changes systems.
| Your can | Bare threads | ASR mount | KeyMo mount | Fast-Attach mount | HUXWRX QD mount |
|---|---|---|---|---|---|
| Direct thread can | Fits | No | No | No | No |
| HUB 1.375x24 can | HUB adapter | HUB adapter | HUB adapter | No | No |
| ASR can | No | Fits | No | No | No |
| KeyMo can | No | No | Fits | No | No |
| Fast-Attach can | No | No | No | Fits | No |
| HUXWRX QD can | No | No | No | No | Fits |
That's why the can comes first. Pick it, then put its mount on every rifle it will ride on. A mount is about a tenth the price of a can.
What thread pitch does a suppressor mount need?
The mount threads onto the barrel, so it's cut to the barrel's pitch: 1/2x28 on 5.56, .223 and .22 LR, and 5/8x24 on .308, .300 Blackout, 6.5 Creedmoor and other .30 and 6.5mm rifles. The can side is the same for both, so one .30 caliber can rides a 5.56 rifle and a .308 rifle with the right mount on each.
Never put a 5.56 can on a .30 caliber barrel. The bore is too small for the bullet.
How do you install a suppressor mount?
- Clean the barrel threads and the shoulder down to bare metal. Oil and old thread locker keep a mount from seating.
- Thread the mount on by hand to the shoulder. If it has a flat side or ports, shim it so it lands where it should when tight. Use shims, not a crush washer: a crush washer rarely crushes evenly and can tilt the mount off the bore.
- Take it back off, put a high temperature thread locker such as Rocksett on the threads, and torque it to the maker's spec against the shoulder or shims.
- Let it cure as the thread locker's directions say before you shoot it, then check that the can goes on and comes off cleanly.
- Check your zero with the can on. Most rifles move a little.
Why do QD mounts use a taper?
Threads hold a can on; they don't center it well. Every quick detach mount here has a cone just behind the lock that the can pulls down onto. The cone puts the can square to the bore every time it goes on, and it seals, so carbon stays out of the threads and the can comes off after a long string. Turn on the cutaway above to see it.
Direct thread cans skip the cone and seat on the barrel shoulder instead, which is why a clean, square shoulder matters more on them.
Frequently Asked Questions
What does ASR stand for on a SilencerCo mount?
Active Spring Retention. The lock ring on the can's mount sets a spring loaded cam against teeth on the muzzle device, so the can can't unscrew itself under recoil and heat. Turn the lock ring to release the cam, then unscrew the can.
Will an ASR mount work with a Dead Air KeyMo can?
No. Each quick detach system only fits its own cans. A KeyMo can won't seat on an ASR mount. If the can has a HUB rear, swap its adapter to ASR and it will.
Do ASR mounts need Rocksett?
Yes. SilencerCo ships Rocksett with its ASR devices: clean the threads, coat them, torque the device to 20 to 30 ft-lbs against the barrel shoulder (shims only for timing, never a crush washer), and let it cure 24 hours before firing.
What are the different suppressor mount types?
Five systems carry most rifle cans: SilencerCo ASR, Dead Air KeyMo, SureFire Fast-Attach and HUXWRX QD, which are quick detach, and HUB, a 1.375x24 thread on the back of the can that takes a swappable adapter. The sixth way is direct thread, where the can screws straight onto the barrel's muzzle threads.
Can I put any suppressor on any mount?
No. Each quick detach can only seats on its own maker's mount: a KeyMo can won't go on an ASR flash hider, and a SureFire can won't go on a KeyMo one. A HUB can is the way around it, because you swap the rear adapter to ASR, KeyMo or direct thread.
What is the best suppressor mount system?
There isn't one best mount, because the can decides it. Pick the can for its sound, weight and back pressure, then run its maker's mount on every rifle it will ride on. If you want to keep your options open, a HUB can lets you change systems later for the price of an adapter.
Should I use a crush washer or shims on a suppressor mount?
Shims. A crush washer rarely crushes evenly, so it can leave the mount a hair off the bore, and the can follows the mount. Every major can maker says to seat a mount against the barrel shoulder or a shim, with a high temperature thread locker such as Rocksett.
Do suppressor mounts have to match my barrel's thread pitch?
Yes, the mount threads onto the barrel, so buy it in the barrel's pitch: 1/2x28 on 5.56 and .22 LR, 5/8x24 on .308, .300 Blackout and 6.5 Creedmoor. The can side doesn't change, so one .30 can runs on both with the right mount on each rifle.
Does a QD mount hurt accuracy?
Not when it's installed right. The taper centers the can the same way every time, so most rifles return to the same point of impact with the can on. Expect that point to differ from the bare muzzle, and check your zero with the can on.
Do I need a flash hider to run a suppressor?
Only on a quick detach system, where the flash hider or brake is the mount. A direct thread can goes on the bare barrel threads and needs no device at all.
Cite this tool: GunPartPicker, “SilencerCo ASR Mount: How It Works and What Fits”, https://gunpartpicker.net/tools/suppressor-mounts/asr. Data from the GunPartPicker catalog and real community builds, prices checked October 28, 2026. Free to cite with attribution.
Read next
All guides →
SUPPRESSORS/09.17.26Best 5.56 Suppressors in 2026
SUPPRESSORS/09.18.26Best 300 Blackout Suppressors in 2026
HANDGUARDS/09.18.26Suppressor Ready Handguards: Inner Diameter and Tucked Cans
STATE LAW/09.23.26Suppressors in 2026: $0 Tax, and No Form 4 Since October 9
SUPPRESSORS/09.18.26Best .22 LR Suppressors in 2026
More Gun Tools
- CompatibilityMuzzle Thread CheckerPick your barrel's caliber and platform, get the standard thread pitch, and see every muzzle device and suppressor in the catalog that actually threads on, with live prices.
- LegalSBR Planner (3D)Set the barrel anywhere from 7.5 to 16 inches, put a stock, a brace or a folder on the back, pin a muzzle device or slide on a can. The ruler under the rifle shows whether you've cleared the 16 inch barrel line and the 26 inch overall line. Pick your state for its SBR, suppressor and assault weapon rules, then price every part and open the build in one click.
- LegalGun Travel CheckerCan I bring my gun to another state? Pick where you start, where you are going and what is coming along: carry pistol, AR-15, magazines, suppressor, SBR, brace, forced reset or binary trigger, hollow points. Every state on the route is checked for transporting firearms across state lines: magazine limits, assault weapon bans, NFA rules, carry permit type and trigger bans, with what to do before the state line.
- PlanningAR Build Cost CalculatorHow much does it cost to build an AR-15? Pick caliber, barrel length, stock or brace and optic, then drag both edges of the price band from the cheap end to the top end. Every slot fills with the part builders add most that is in stock, priced live. The headline total is the core rifle, optics and extras are priced separately, and beside them sits what builders really pay per slot, measured from real part picks. Roll a random build, or open yours in the builder in one click. Computed from over 1 million AR parts selected on GunPartPicker since 2020.
- CompatibilityDI vs Piston (3D)Watch a direct impingement AR-15 and a gas piston HK416 fire in slow motion x-ray 3D. Follow the gas from the port back into the carrier, or into a piston that kicks an op rod, see which bolt runs hot, and compare weight, cleaning, suppressed use, carrier tilt and cost.
- CompatibilityFRT and Binary Trigger PickerChoose your platform and see every forced reset trigger, binary trigger and Super Safety the catalog carries for it, what the host needs to run one, and where each is in stock.
- CompatibilityGlock Red Dot Fit CheckerPick how your Glock slide is cut and see which red dots mount directly, which need a plate, and the plates and optics in stock right now.
- CompatibilityGlock Size ComparisonPick any two Glocks and see them to scale as real photos sized to Glock's published dimensions, side by side, from behind and as an X-ray, with the difference in length, height, width and weight in one line and the pistols in stock for each.
- CompatibilityP385 Size ComparisonSee the SIG P385 CARRY, COMP and FULL to scale against the P365-XMACRO, the P320 and the Glock 19, 17, 45 and 43X, as real photos sized to the published length and height, with every dimension and where to order one.
- Paint plannerGun Paint PlannerRattle can guns online before you spray. Paint, stencil and camo a real photo of about 1,800 guns: AR-15s, AR-10s, AR-9s, AKs, every Glock, pistols, shotguns and bolt action rifles, the way the rattlecanned guns on r/rattlecannedguns are done, with Krylon, Rust-Oleum, Aluma-Hyde, DuraCoat and Cerakote colors, then get the cans to buy in spray order.
- TuningTwist Rate CalculatorPick a bullet and a twist rate, get the Miller stability factor, then see barrels with that twist and ammo loaded with that bullet, with today's price per round.
- TuningOptic Zero (3D)See where a 25, 36, 50, 100 or 200 yard zero hits on a 3D range, with your ammo, barrel length and optic height. Compare two zeros side by side, look through your red dot, EOTech or LPVO at each distance, then tap where your group hit and get the exact clicks up, down, left and right for your optic.
- TuningBuffer Weight CalculatorEnter your gas system, barrel length, buffer tube and ammo, add a suppressor or a fast trigger, and get the buffer weight to start with plus the buffers in stock that match.
- TuningBuffer System (3D)Watch an AR-15 cycle in slow motion, cut open: gas drives the bolt carrier back, the bolt unlocks and throws the brass, the buffer and spring soak it up and send it home. Swap carbine, H, H2 and H3 buffers, add gas or a suppressor, and see the carrier speed, where the brass lands and when it short strokes.
- LegalBarrel and Overall Length CheckerEnter barrel length, muzzle device and how the back end is configured, and see whether the build is a rifle, a short barreled rifle, a pistol or an AOW under federal law, with the barrels in stock at that length.
- PlanningNight VisionLook around a real 360 degree scene through Gen 1, Gen 2+, Gen 3 green and white phosphor tubes, digital night vision and thermal. Turn the moon down from full to overcast, switch on an IR light, compare two devices side by side. Or walk a 3D farm at night and spot the people, hogs and deer hiding in it. Then see the PVS-14, PVS-31, GPNVG-18 and the thermal scopes people buy, with prices.