Do PSA lowers fit Spike's uppers?
PSA lower + Spike's upper: yes, they fit
Yes. Palmetto State Armory (PSA) AR-15 lowers fit Spike's Tactical AR-15 uppers. Both are AR-15 size receivers. A real mil-spec keeps AR-15 receivers from different makers close, though not exact, and fit problems show up most when the upper and lower come from different makers. PSA and Spike's AR-9 (9mm) lowers and uppers fit each other too.
Fit comes from the same rules the AR builder runs on every part you add. Build data only ranks the setups; it never decides fit. Checked November 18, 2026.
Our take
Most built setup: the PSA Lower Magpul MOE EPT Edition with the Spike's upper.
About 1 in 90 PSA lowers in our builds carries a Spike's upper.
PSA sells affordable AR lowers, uppers, BCGs and complete rifles, and it makes them in house from forging to finished part.
Founded 2008, Columbia, South Carolina, Made in USA
Spike's Tactical makes AR rifles, uppers, lowers and parts in Florida, with the Spider logo on the lowers. The T3 tungsten buffer is one of their most known parts.
Founded 2001, Apopka, Florida, Made in USA
PSA lowers and Spike's uppers by platform
Each row is checked on the most built part of that platform from each brand.
| Platform | Fit |
|---|---|
| AR-15 | Yes, they fit |
| AR-9 (9mm) | Yes, they fit |
AR-15: yes, they fit
Both are AR-15 size receivers.
Checked on this PSA lower
PSA Lower Magpul MOE EPT Edition$149.99and this Spike's upper
Spike's Tactical Upper Receiver$99.99AR-9 (9mm): yes, they fit
Both are AR-9 receivers. The upper is stripped, so the barrel you pick sets the caliber.
Checked on this PSA lower
PSA PX-9 Forged Glock(R)-Style MOE EPT Lower$269.99and this Spike's upper
Spike's Tactical Flat Top Upper w/ Ejection Port Door$99.99Most built PSA lowers and Spike's uppers setups
Ranked by how often builders pick the exact pair. Only pairs our rules pass are listed.
#1Yes, they fit11% of these buildsCheck fit
#2Yes, they fit9% of these buildsCheck fit
#3Yes, they fit7% of these buildsCheck fit
#4Yes, they fit7% of these buildsCheck fit
#5Yes, they fit6% of these buildsCheck fit
#6Yes, they fit6% of these buildsCheck fit
#7Yes, they fit6% of these buildsCheck fit
#8Yes, they fit4% of these buildsCheck fit
What PSA and Spike's say
PSA: PSA owns its supply chain, including Spartan Forging and DC Machine, from forging the receivers to finishing the muzzle brake.
PSA: PSA's PX-9 lower takes Glock style magazines, is designed to work with PSA's 9mm Hybrid uppers and has no last round bolt hold open.
PSA: PSA's PX-9 Glock lower works with most AR-9 uppers, including Aero, Daniel Defense, Foxtrot Mike and Bear Creek, though non PSA uppers can see some tolerance stacking.
PSA: PSA cannot guarantee the PX-9 lower will run with EndoMag 9mm magazines.
Spike's: The Spider stripped lower is forged 7075-T6 with a Type III Class 2 hard coat anodized finish.
Spike's: Spike's 9mm Glock Gen II billet set comes with last round bolt hold open and the ejector, and the upper has no dust cover, forward assist or brass deflector.
Fit is judged from the specs retailers list, which can be missing or wrong. Confirm with the manufacturer before you buy, and have a qualified gunsmith check any build before you fire it.
Other uppers builders put on PSA lowers
- PSA lowers + PSA uppersMost picked
- PSA lowers + BCM uppersSecond most picked
- PSA lowers + TacFire uppersThird most picked
- PSA lowers + Aero uppersFourth most picked
- PSA lowers + Geissele uppersFifth most picked
- PSA lowers + Radical uppersSixth most picked
- PSA lowers + Daniel Defense uppersSeventh most picked
- PSA lowers + Wilson Combat uppersEighth most picked
Other lowers under Spike's uppers
- Spike's lowers + Spike's uppersSecond most picked
- Aero lowers + Spike's uppersSixth most picked
PSA lowers and Spike's uppers: questions builders ask
Will a Spike's upper fit a PSA lower?
Yes. PSA AR-15 lowers fit Spike's AR-15 uppers. Both are AR-15 size receivers.
Do I need a matched upper and lower?
A real mil-spec keeps AR-15 receivers from different makers close, though not exact, and fit problems show up most when the upper and lower come from different makers.
Why might a Spike's upper feel loose or tight on a PSA lower?
Some play between an AR-15 upper and lower is common, but it can get excessive when the two come from different makers, and a tension screw or an Accu-Wedge takes it up.




