Gun Tools·Planning·Updated November 4, 2026

English

5.56 and .300 BLK Ammo Cutaway in 3D: M193, M855, M855A1, 77 gr

Cut M193, M855 green tip, M855A1, 77 gr OTM and .300 BLK supersonic and subsonic in half and compare them side by side in 3D: what each bullet is made of, its speed from short barrels, steel targets, and today's price per round. Then watch a .300 BLK round go into a 5.56 chamber.

Quick answer

  • M193 is a 55 gr lead core bullet at about 3,050 fps from 16"; M855 is 62 gr with a steel penetrator in the nose and a green tip, at about 3,000 fps.
  • M855 and M855A1 have steel in the bullet and damage steel targets; M193, 77 gr OTM and .300 BLK lead core loads are fine on AR500 at 100 yd or more.
  • A .300 BLK round fits a 5.56 chamber except for its bullet, which stops it about 0.225" short; the bolt can force it home, and firing it wrecks the gun.

Source: GunPartPicker ammo model: SAAMI case drawings, published bullet weights, lengths and types, 16 inch chronograph averages moved by fps per inch.

See inside 5.56 and .300 BLK ammo in 3D

Six rounds side by side, cut in half: the brass, the powder, the primer, and what each bullet is made of. Pick one for its speed from your barrel, whether it's safe on steel, and the cheapest price today. Then try the wrong chamber: a .300 BLK round going into a 5.56.

5.56 M855 62 gr green tip

62 gr · cut in half · to scale

Round

Drawn to scale in inches. Cases follow the SAAMI drawings; bullet outsides are fitted to each bullet's published length and type, and the insides (lead, steel, copper) follow published cross sections, drawn approximately. Powder is shown as a fill, not grain by grain.

5.56 NATO · 62 gr

5.56 M855 62 gr green tip

62 gr FMJ boat tail: a steel penetrator ahead of a lead core, green tip. Built to punch through a steel helmet at range; in soft targets it's less consistent than M193 at the same speed.

Steel targets: no. Steel penetrator. It pits and can hole AR500 plate, and most ranges ban it on steel.

10.3" barrel
2,687 fps 994 ft-lb
14.5" barrel
2,918 fps 1,172 ft-lb
16" barrel
3,000 fps 1,239 ft-lb
Ballistic coefficient
0.304 G1
Cheapest today
$0.59/rd
All six rounds
RoundBulletFrom 16"Short barrelBC (G1)SteelCheapest
55 gr, 0.745" long3,050 fps2,794 fps (10.3")0.243OK$0.50/rd
62 gr, 0.906" long3,000 fps2,687 fps (10.3")0.304No$0.59/rd
62 gr, 0.98" long3,010 fps2,822 fps (10.3")0.307NoNone in stock
77 gr, 0.995" long2,650 fps2,479 fps (10.3")0.372OK$1.25/rd
125 gr, 1.08" long2,175 fps2,035 fps (9")0.348OK$0.75/rd
220 gr, 1.5" long1,010 fps975 fps (9")0.608OK$0.92/rd

M193 vs M855 vs M855A1: what's inside

M193 is the simple one: a 55 gr lead core in a copper alloy jacket, open at the base. It's the fastest of the three, about 3,050 fps from a 16" barrel, and the one known for breaking apart in tissue when it hits fast enough, roughly above 2,700 fps. From a 10.3" barrel it leaves at about 2,794 fps, so it only does that up close.

M855 (green tip, the NATO SS109 design) adds weight and a 0.38" steel penetrator ahead of the lead core, under a closed nose. The bullet is 0.906" long against M193's 0.745", so it sits deeper in the case. It holds speed better (a ballistic coefficient of about 0.304 against 0.243) and it's made for hard targets, not for steel plates at your range.

M855A1, the Army's round since 2010, turns the design around: the hardened steel penetrator is the bullet's exposed point, sitting on a copper slug in a copper cup, with no lead at all. It's the longest at 0.98" and runs about 2,961 fps from an M4's 14.5" barrel. More in the M193 vs M855 vs M855A1 guide.

77 gr OTM (the Mk 262 type) is a long match bullet with an open tip: slower out of the barrel, about 2,650 fps from 16", but it holds speed best (0.372 BC) and is the special operations pick for short barrels.

Which ammo is safe on steel targets?

Anything with a lead core, at the range's minimum distance (100 yards for rifles on AR500 at most ranges): M193, 77 gr OTM and both .300 BLK loads here. Not M855 or M855A1: their steel penetrators pit AR500 plate and can punch through it, and ranges with steel targets usually ban them. That's why many ranges check with a magnet: if it sticks to the bullet, it stays off the steel (bimetal jackets stick too, and most ranges ban those as well).

Velocity matters too. Even lead core bullets crater steel when they hit too fast, which is why the distance rule exists; a 5.56 from a 20" barrel at 25 yards is harder on a plate than the same round at 100.

Why a .300 Blackout round fits in a 5.56 chamber

The .300 BLK case is made from the 5.56 case: the same 0.378" rim and head, cut down to 1.368" (the 5.56 is 1.76") and opened up to hold a .308 bullet. So it fits the same bolt, the same magazine and, nearly, the same chamber: its body is shorter and slimmer than the 5.56 chamber's.

Only the bullet doesn't fit. The 5.56 chamber narrows to a 0.255" neck, and the .308 bullet's nose meets it with the round about 0.225" short of home (0.255" for a long 220 gr subsonic bullet). The bolt carrier slams forward hard enough to push the bullet that far back into the case and lock, so it can feel like a normal round. Fired, a .30 caliber bullet meets a .22 caliber bore: the pressure spikes far past what the barrel and bolt are built for, and the barrel, upper, bolt and magazine usually go with it.

How shooters keep them apart: a different magazine for each caliber (a different brand or color, or 20 rounders for .300 BLK and 30s for 5.56), a paint band or tape on every .300 BLK magazine, the ammo stored in separate cans, and the .300 BLK upper marked. Compare the two calibers from short barrels in the .300 BLK vs 5.56 barrel race.

Velocity by barrel length

Chronograph averages from a 16 inch barrel, moved by a flat fps per inch, the same model as the barrel race and optic zero tools. The .300 BLK loads use 9, 10.5 and 16 inch barrels.

RoundWeightShortMiddle16"Energy, short
M19355 gr2,794 fps (10.3")2,983 fps (14.5")3,050 fps (16")953 ft-lb
M85562 gr2,687 fps (10.3")2,918 fps (14.5")3,000 fps (16")994 ft-lb
M855A162 gr2,822 fps (10.3")2,961 fps (14.5")3,010 fps (16")1,096 ft-lb
77 gr OTM77 gr2,479 fps (10.3")2,605 fps (14.5")2,650 fps (16")1,051 ft-lb
BLK 125 super125 gr2,035 fps (9")2,065 fps (10.5")2,175 fps (16")1,149 ft-lb
BLK 220 sub220 gr975 fps (9")983 fps (10.5")1,010 fps (16")464 ft-lb

5.56 and .300 BLK ammo prices today

The cutaway shows the cheapest of each load confirmed in stock today, landed with shipping. Every listing, sorted by cost per round: 5.56 NATO, .223 Rem and .300 Blackout. Super and sub speeds above are for 125 gr and 220 gr loads; check the box for yours.

Frequently Asked Questions

What is the difference between M193 and M855?

The bullet. M193 is a 55 gr full metal jacket with a lead core; M855 is a 62 gr full metal jacket with a steel penetrator ahead of a lead core, marked with a green tip. M193 is a little faster, about 3,050 fps from a 16 inch barrel against 3,000, and M855 holds its speed better, with a ballistic coefficient of about .304 against .243.

Can you shoot M855 green tip at steel targets?

Not at most ranges. The steel penetrator pits AR500 plate and can punch through it, so ranges with steel usually ban green tip and M855A1. M193 and lead core match ammo like 77 gr OTM are fine on AR500 at 100 yards or more.

What is M855A1?

The Army's current 5.56 round, fielded in 2010: a 62 gr bullet with an exposed hardened steel tip on a copper slug in a copper cup, with no lead. It is about 0.98 inch long against M855's 0.906, and it is built to work the same from a short barrel as from a long one.

Why does a 300 Blackout round chamber in a 5.56?

Because the cases share the same head and the .300 BLK case is shorter and slimmer than the 5.56 chamber. Only the .308 bullet doesn't fit: it meets the 5.56 chamber's neck about 0.23 inch short of home, and the bolt can push it back into the case and lock. Fired, a .30 caliber bullet is driven into a .22 caliber bore and the gun comes apart.

What is Mk 262?

A 77 gr open tip match 5.56 load made for special operations rifles like the Mk 12 and Mk 18. It leaves a 16 inch barrel at about 2,650 fps, slower than M193, but it holds speed better and breaks up reliably in tissue even from a 10.3 inch barrel.

Is 300 Blackout subsonic ammo really subsonic?

Yes, from any common barrel: a 220 gr subsonic load leaves a 16 inch barrel at about 1,010 fps and loses only about 5 fps an inch shorter, under the speed of sound (about 1,116 fps at sea level). That keeps the supersonic crack out of a suppressed shot.

Cite this tool: GunPartPicker, “5.56 and .300 BLK Ammo Cutaway in 3D: M193, M855, M855A1, 77 gr”, https://gunpartpicker.net/tools/556-ammo-cutaway. Cases from the SAAMI drawings; bullets from published weights, lengths and cross sections; prices confirmed in stock today Free to cite with attribution.

More Gun Tools