Do Radian lowers fit PSA uppers?

Radian lower + PSA upper: yes, they fit

Yes. Radian AR-15 lowers fit Palmetto State Armory (PSA) AR-15 uppers. Both are AR-15 size receivers. A real mil-spec keeps AR-15 receivers from different makers close, though not exact, and fit problems show up most when the upper and lower come from different makers. We checked them with the rules the AR builder runs.

Fit comes from the same rules the AR builder runs on every part you add. Build data only ranks the setups; it never decides fit. Checked November 18, 2026.

Our take

Most built setup: the Radian A-DAC 15 Stripped lower with the PSA Upper 5.56 16in Mid-Length.

About 1 in 30 Radian lowers in our builds carries a PSA upper.

Radian lowers

Radian makes ambidextrous AR controls in Redmond, Oregon, and the Raptor charging handle is the one everybody knows. They used to go by AXTS Weapons Systems.

Redmond, Oregon, Made in USA

PSA uppers

PSA sells affordable AR lowers, uppers, BCGs and complete rifles, and it makes them in house from forging to finished part.

Founded 2008, Columbia, South Carolina, Made in USA

Radian lowers and PSA uppers by platform

Each row is checked on the most built part of that platform from each brand.

PlatformFit
AR-15Yes, they fit

AR-15: yes, they fit

Both are AR-15 size receivers. An AR-15 lower takes the upper's 5.56 NATO.

Most built Radian lowers and PSA uppers setups

Ranked by how often builders pick the exact pair. Only pairs our rules pass are listed.

  1. #1Yes, they fit15% of these buildsCheck fit

  2. #2Yes, they fit12% of these buildsCheck fit

  3. #3Yes, they fit8% of these buildsCheck fit

  4. #4Yes, they fit4% of these buildsCheck fit

  5. #5They fit, with a catch4% of these buildsCheck fit

  6. #6Yes, they fit4% of these buildsCheck fit

  7. #7Yes, they fit4% of these buildsCheck fit

  8. #8Yes, they fit4% of these buildsCheck fit

What Radian and PSA say

Radian: Radian's A-DAC 15 has a spring loaded plunger called SART that takes up wobble between the upper and lower.

Radian: Radian's A-DAC 15 stripped lower ships with its proprietary parts, including the extended bolt catch, both mag release parts, the right side bolt release paddle and a hammer pin.

Radian: The Radian A-DAC 15 takes mil-spec .154 inch trigger pins.

PSA: PSA owns its supply chain, including Spartan Forging and DC Machine, from forging the receivers to finishing the muzzle brake.

PSA: The KS-47 Gen2 bolt has two lugs reshaped so it feeds from AK magazines.

Fit is judged from the specs retailers list, which can be missing or wrong. Confirm with the manufacturer before you buy, and have a qualified gunsmith check any build before you fire it.

Other uppers builders put on Radian lowers

Other lowers under PSA uppers

Radian lowers and PSA uppers: questions builders ask

Will a PSA upper fit a Radian lower?

Yes. Radian AR-15 lowers fit PSA AR-15 uppers. Both are AR-15 size receivers.

Do I need a matched upper and lower?

A real mil-spec keeps AR-15 receivers from different makers close, though not exact, and fit problems show up most when the upper and lower come from different makers.

Why might a PSA upper feel loose or tight on a Radian lower?

Some play between an AR-15 upper and lower is common, but it can get excessive when the two come from different makers, and a tension screw or an Accu-Wedge takes it up.