Do PSA lowers fit POF-USA uppers?

PSA lower + POF-USA upper: yes, they fit

Yes. Palmetto State Armory (PSA) AR-15 lowers fit POF-USA AR-15 uppers. Both are AR-15 size receivers. A real mil-spec keeps AR-15 receivers from different makers close, though not exact, and fit problems show up most when the upper and lower come from different makers. We checked them with the rules the AR builder runs.

One exception: PSA AR-15 lowers are a smaller frame and do not fit POF-USA AR-10 (.308) uppers. One catch: AR-10 parts aren't standardized between makers, so ask Palmetto State Armory and POF-USA if this lower and upper fit before you buy.

Fit comes from the same rules the AR builder runs on every part you add. Build data only ranks the setups; it never decides fit. Checked November 17, 2026.

Our take

Most built setup: the PSA Lower Magpul MOE EPT Edition with the POF-USA P415 Edge 5.56x45mm NATO upper.

Fewer than 1 in 100 PSA lowers in our builds carries a POF-USA upper.

PSA lowers

PSA sells affordable AR lowers, uppers, BCGs and complete rifles, and it makes them in house from forging to finished part.

Founded 2008, Columbia, South Carolina, Made in USA

POF-USA uppers

POF-USA makes short stroke piston AR rifles that push an op rod instead of dumping gas into the action.

Founded 2002, Phoenix, Arizona, Made in USA

PSA lowers and POF-USA uppers by platform

Each row is checked on the most built part of that platform from each brand.

PlatformFit
AR-15Yes, they fit
AR-10 (.308)They fit, with a catch
AR-15 lower + AR-10 (.308) upperNo, they do not fit

AR-15: yes, they fit

Both are AR-15 size receivers. An AR-15 lower takes the upper's 5.56 NATO.

AR-10 (.308): they fit, with a catch

AR-10 parts aren't standardized between makers, so ask Palmetto State Armory and POF-USA if this lower and upper fit before you buy.

AR-15 lower + AR-10 (.308) upper: no, they do not fit

The lower receiver (AR-15) cannot support a AR-10/.308 build.

Most built PSA lowers and POF-USA uppers setups

Ranked by how often builders pick the exact pair. Only pairs our rules pass are listed.

  1. #1Yes, they fit9% of these buildsCheck fit

  2. #2Yes, they fit7% of these buildsCheck fit

  3. #3Yes, they fit7% of these buildsCheck fit

  4. #4Yes, they fit4% of these buildsCheck fit

  5. #5Yes, they fit4% of these buildsCheck fit

  6. #6Yes, they fit4% of these buildsCheck fit

  7. #7Yes, they fit2% of these buildsCheck fit

  8. #8Yes, they fit2% of these buildsCheck fit

Watch the frame size. Builders also pair parts our rules say do not fit, like these two: Lower Receiver (300 Blackout) cannot support an AR-10/.308 build.

What PSA and POF-USA say

PSA: PSA owns its supply chain, including Spartan Forging and DC Machine, from forging the receivers to finishing the muzzle brake.

PSA: PSA's Gen3 PA10 lowers work with Gen1 and Gen2 PA10 uppers, but Gen3 with Gen3 is recommended for the best look and performance, since mixed generations differ on the outside.

PSA: The PSA PA-10 follows the DPMS pattern, so it can use a wide range of DPMS style parts.

PSA: The AR-10 has no common design across makers the way the AR-15 does, so use only PSA PA10 parts in PSA's PA10 receivers and not other makers' parts.

Fit is judged from the specs retailers list, which can be missing or wrong. Confirm with the manufacturer before you buy, and have a qualified gunsmith check any build before you fire it.

Other uppers builders put on PSA lowers

Other lowers under POF-USA uppers

PSA lowers and POF-USA uppers: questions builders ask

Will a POF-USA upper fit a PSA lower?

Yes. PSA AR-15 lowers fit POF-USA AR-15 uppers. Both are AR-15 size receivers.

Do I need a matched upper and lower?

A real mil-spec keeps AR-15 receivers from different makers close, though not exact, and fit problems show up most when the upper and lower come from different makers.

Does a PSA AR-10 lower fit a POF-USA upper?

PSA AR-10 (.308) lowers fit POF-USA AR-10 (.308) uppers, with one thing to check. AR-10 parts aren't standardized between makers, so ask Palmetto State Armory and POF-USA if this lower and upper fit before you buy. PSA AR-15 lowers are a smaller frame and do not fit POF-USA AR-10 (.308) uppers.

Why might a POF-USA upper feel loose or tight on a PSA lower?

Some play between an AR-15 upper and lower is common, but it can get excessive when the two come from different makers, and a tension screw or an Accu-Wedge takes it up.